lkml.org 
[lkml]   [2015]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] extcon: usb-gpio: register extcon device before IRQ registration
Date
IRQ handler touches info->edev, so if interrupt occurs before extcon
device initialization it can cause NULL pointer dereference. Doing extcon
initialization before IRQ handler registration fixes this problem.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Roger Quadros <rogerq@ti.com>
---
drivers/extcon/extcon-usb-gpio.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index 3f0bad3..f6aa99d 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -119,6 +119,18 @@ static int usb_extcon_probe(struct platform_device *pdev)
return PTR_ERR(info->id_gpiod);
}

+ info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
+ if (IS_ERR(info->edev)) {
+ dev_err(dev, "failed to allocate extcon device\n");
+ return -ENOMEM;
+ }
+
+ ret = devm_extcon_dev_register(dev, info->edev);
+ if (ret < 0) {
+ dev_err(dev, "failed to register extcon device\n");
+ return ret;
+ }
+
ret = gpiod_set_debounce(info->id_gpiod,
USB_GPIO_DEBOUNCE_MS * 1000);
if (ret < 0)
@@ -142,18 +154,6 @@ static int usb_extcon_probe(struct platform_device *pdev)
return ret;
}

- info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
- if (IS_ERR(info->edev)) {
- dev_err(dev, "failed to allocate extcon device\n");
- return -ENOMEM;
- }
-
- ret = devm_extcon_dev_register(dev, info->edev);
- if (ret < 0) {
- dev_err(dev, "failed to register extcon device\n");
- return ret;
- }
-
platform_set_drvdata(pdev, info);
device_init_wakeup(dev, 1);

--
1.9.1


\
 
 \ /
  Last update: 2015-04-01 10:01    [W:0.120 / U:1.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site