lkml.org 
[lkml]   [2015]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
Date
From: Xudong Chen <xudong.chen@mediatek.com>

Add devicetree bindings for Mediatek Soc I2C driver.

Signed-off-by: Xudong Chen <xudong.chen@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
---
.../devicetree/bindings/i2c/i2c-mt6577.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
new file mode 100644
index 0000000..0ce6fa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -0,0 +1,41 @@
+* Mediatek's I2C controller
+
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+ - compatible: value should be either of the following.
+ (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+ (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+ (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+ (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+ (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+ - reg: physical base address of the controller and dma base, length of memory
+ mapped region.
+ - interrupts: interrupt number to the cpu.
+ - clock-div: the fixed value for frequency divider of clock source in i2c
+ module. Each IC may be different.
+ - clocks: clock name from clock manager
+ - clock-names: Must include "main" and "dma", if enable have-pmic need include
+ "pmic" extra.
+
+Optional properties:
+ - clock-frequency: Frequency in Hz of the bus when transfer, the default value
+ is 100000.
+ - mediatek,have-pmic: platform can control i2c form special pmic side.
+ Only mt6589 and mt8135 support this feature.
+ - mediatek,use-push-pull: IO config use push-pull mode.
+
+Example:
+
+ i2c0: i2c@1100d000 {
+ compatible = "mediatek,mt6577-i2c";
+ reg = <0x1100d000 0x70>,
+ <0x11000300 0x80>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <400000>;
+ mediatek,have-pmic;
+ clock-div = <16>;
+ clocks = <&i2c0_ck>, <&ap_dma_ck>;
+ clock-names = "main", "dma";
+ };
+
--
1.8.1.1.dirty


\
 
 \ /
  Last update: 2015-04-01 08:01    [W:0.054 / U:3.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site