lkml.org 
[lkml]   [2015]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv3 07/10] fbdev: ssd1307fb: Add module parameter to set refresh rate of the display
Date
This patch adds the module parameter "refreshrate" to set delay for the
deferred io. The refresh rate is given in units of Hertz. The default
refresh rate is 1 Hz.

Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
---
drivers/video/fbdev/ssd1307fb.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 08720be..7c8e627 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -43,6 +43,11 @@
#define SSD1307FB_SET_COM_PINS_CONFIG 0xda
#define SSD1307FB_SET_VCOMH 0xdb

+#define REFRASHRATE 1
+
+static u_int refreshrate = REFRASHRATE;
+module_param(refreshrate, uint, 0);
+
static u_int contrast = 128;
module_param(contrast, uint, S_IRUGO);

@@ -270,11 +275,6 @@ static void ssd1307fb_deferred_io(struct fb_info *info,
ssd1307fb_update_display(info->par);
}

-static struct fb_deferred_io ssd1307fb_defio = {
- .delay = HZ,
- .deferred_io = ssd1307fb_deferred_io,
-};
-
static int ssd1307fb_init(struct ssd1307fb_par *par)
{
int ret;
@@ -475,6 +475,7 @@ static int ssd1307fb_probe(struct i2c_client *client,
{
struct fb_info *info;
struct device_node *node = client->dev.of_node;
+ struct fb_deferred_io *ssd1307fb_defio;
u32 vmem_size;
struct ssd1307fb_par *par;
u8 *vmem;
@@ -544,10 +545,20 @@ static int ssd1307fb_probe(struct i2c_client *client,
goto fb_alloc_error;
}

+ ssd1307fb_defio = devm_kzalloc(&client->dev, sizeof(struct fb_deferred_io), GFP_KERNEL);
+ if (!ssd1307fb_defio) {
+ dev_err(&client->dev, "Couldn't allocate deferred io.\n");
+ ret = -ENOMEM;
+ goto fb_alloc_error;
+ }
+
+ ssd1307fb_defio->delay = HZ / refreshrate;
+ ssd1307fb_defio->deferred_io = ssd1307fb_deferred_io;
+
info->fbops = &ssd1307fb_ops;
info->fix = ssd1307fb_fix;
info->fix.line_length = par->width / 8;
- info->fbdefio = &ssd1307fb_defio;
+ info->fbdefio = ssd1307fb_defio;

info->var = ssd1307fb_var;
info->var.xres = par->width;
--
2.3.0


\
 
 \ /
  Last update: 2015-03-09 23:41    [W:1.939 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site