lkml.org 
[lkml]   [2015]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 2/2] pinctrl: mediatek: Adjust mt8173 pinctrl kconfig
Date
On Friday 06 March 2015 14:24:51 Yingjoe Chen wrote:
> Linus,
> This one make PINCTRL_MT8173 option user selectable and is based on
> mtk-staging in your tree. If you think this is OK, please applied or
> squash this into previous change. Thanks.

The patch looks good in principle, just two small comments

> --------------------------------------------------

To simplify the job for Linus here, please start the line above
with

8<------

(a stylized pair if scissors)

which is the magic that git-am looks for.


> ARM64 maintainer doesn't want to add MACH_* for each SoC.
> Adjust mt8173 pinctrl kconfig entry so user can manually select it.
>
> Also make PINCTRL_MT8135 build when COMPILE_TEST is enabled.
>
> Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
> ---
> drivers/pinctrl/mediatek/Kconfig | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
> index 49b8649..1472f0e 100644
> --- a/drivers/pinctrl/mediatek/Kconfig
> +++ b/drivers/pinctrl/mediatek/Kconfig
> @@ -1,4 +1,4 @@
> -if ARCH_MEDIATEK
> +if ARCH_MEDIATEK || COMPILE_TEST
>
> config PINCTRL_MTK_COMMON
> bool
> @@ -8,11 +8,13 @@ config PINCTRL_MTK_COMMON
> select OF_GPIO
>
> config PINCTRL_MT8135
> - def_bool MACH_MT8135
> + def_bool MACH_MT8135 || COMPILE_TEST
> select PINCTRL_MTK_COMMON
>
> config PINCTRL_MT8173
> - def_bool MACH_MT8173
> + bool "Mediatek MT8173 pin control"
> + def_bool y
> + depends on ARM64 || COMPILE_TEST
> select PINCTRL_MTK_COMMON
>

You have slightly different logic here: PINCTRL_MT8135 will
always be enabled when COMPILE_TEST is on, while PINCTRL_MT8173
is enabled by default in this case, but can be turned off.

Neither of them is what you really want, which would be

config PINCTRL_MT8135
bool "Mediatek MT8135 pin control"
depends on MACH_MT8135 || COMPILE_TEST
default MACH_MT8135
select PINCTRL_MTK_COMMON

config PINCTRL_MT8135
bool "Mediatek MT8173 pin control"
depends on MACH_MT8173 || COMPILE_TEST
default MACH_MT8173
select PINCTRL_MTK_COMMON

This way, the options are only enabled by default if MACH_MT8135
or MACH_MT8173 are enabled, but you are free to enable or disable
them when COMPILE_TEST is set. Alternatively, you can do

config PINCTRL_MT8135
bool "Mediatek MT8135 pin control" if COMPILE_TEST && !MACH_MT8135
default MACH_MT8135
select PINCTRL_MTK_COMMON

config PINCTRL_MT8135
bool "Mediatek MT8173 pin control" if COMPILE_TEST && !MACH_MT8173
default MACH_MT8173
select PINCTRL_MTK_COMMON

which will let you turn on the options if COMPILE_TEST is set, but not
let you turn them off when the drivers are required.

Arnd

\
 
 \ /
  Last update: 2015-03-09 21:41    [W:0.302 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site