lkml.org 
[lkml]   [2015]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] rnndb: Do not use enum mdp5_client_id to configure SMP
Date
SMP blocks are configured for specific client IDs (ports).
These client IDs can be different from one chip to another for a
given pipe.

e.g.: DMA0 pipe fetch Y component is connected to:
- port #10 for MDP5 v1.3
- port #4 for MDP5 v1.6

In order to be compatible for upcoming versions of MDP5, the
client ID list is passed through the MDP5 config module rather
than using a list of hard-coded enum values.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
rnndb/mdp/mdp5.xml | 34 ++++------------------------------
1 file changed, 4 insertions(+), 30 deletions(-)

diff --git a/rnndb/mdp/mdp5.xml b/rnndb/mdp/mdp5.xml
index aedaa7c..423249a 100644
--- a/rnndb/mdp/mdp5.xml
+++ b/rnndb/mdp/mdp5.xml
@@ -91,33 +91,6 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
<value name="BWC_Q_MED" value="2"/>
</enum>

- <enum name="mdp5_client_id">
- <value name="CID_UNUSED" value="0"/>
- <value name="CID_VIG0_Y" value="1"/>
- <value name="CID_VIG0_CR" value="2"/>
- <value name="CID_VIG0_CB" value="3"/>
- <value name="CID_VIG1_Y" value="4"/>
- <value name="CID_VIG1_CR" value="5"/>
- <value name="CID_VIG1_CB" value="6"/>
- <value name="CID_VIG2_Y" value="7"/>
- <value name="CID_VIG2_CR" value="8"/>
- <value name="CID_VIG2_CB" value="9"/>
- <value name="CID_DMA0_Y" value="10"/>
- <value name="CID_DMA0_CR" value="11"/>
- <value name="CID_DMA0_CB" value="12"/>
- <value name="CID_DMA1_Y" value="13"/>
- <value name="CID_DMA1_CR" value="14"/>
- <value name="CID_DMA1_CB" value="15"/>
- <value name="CID_RGB0" value="16"/>
- <value name="CID_RGB1" value="17"/>
- <value name="CID_RGB2" value="18"/>
- <value name="CID_VIG3_Y" value="19"/>
- <value name="CID_VIG3_CR" value="20"/>
- <value name="CID_VIG3_CB" value="21"/>
- <value name="CID_RGB3" value="22"/>
- <value name="CID_MAX" value="23"/>
- </enum>
-
<enum name="mdp5_cursor_format">
<value name="CURSOR_FMT_ARGB8888" value="0"/>
<value name="CURSOR_FMT_ARGB1555" value="2"/>
@@ -160,9 +133,10 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
</bitset>

<bitset name="mdp5_smp_alloc" inline="yes">
- <bitfield name="CLIENT0" low="0" high="7" type="mdp5_client_id"/>
- <bitfield name="CLIENT1" low="8" high="15" type="mdp5_client_id"/>
- <bitfield name="CLIENT2" low="16" high="23" type="mdp5_client_id"/>
+ <!-- Use "mdp5_cfg->mdp.smp.clients[enum mdp5_pipe]" instead -->
+ <bitfield name="CLIENT0" low="0" high="7" type="uint"/>
+ <bitfield name="CLIENT1" low="8" high="15" type="uint"/>
+ <bitfield name="CLIENT2" low="16" high="23" type="uint"/>
</bitset>

<!-- Even though there is 1 MDP, length=2 to force dynamic offset usage -->
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project



\
 
 \ /
  Last update: 2015-03-09 14:21    [W:0.146 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site