lkml.org 
[lkml]   [2015]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 03/10] reset: berlin: convert to a platform driver
From
Date
Hi Antoine,

Am Freitag, den 06.03.2015, 16:05 +0100 schrieb Antoine Tenart:
> The Berlin reset controller was introduced without being a platform
> driver because of a needed DT rework: the node describing the reset
> controller also describes the pinctrl and clk controllers...
>
> The DT issue being solved thanks to the addition of the Berlin
> controller mfd driver, it is now possible to convert the Berlin reset
> driver to a plaftorm driver.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>

Looks good to me. Do you want to merge this together with the rest of
the series, or should I queue the reset patch?

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

> ---
> drivers/reset/reset-berlin.c | 71 +++++++++++++++++---------------------------
> 1 file changed, 27 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/reset/reset-berlin.c b/drivers/reset/reset-berlin.c
> index f8b48a13cf0b..5f414fa142ff 100644
> --- a/drivers/reset/reset-berlin.c
> +++ b/drivers/reset/reset-berlin.c
> @@ -12,10 +12,12 @@
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/of.h>
> #include <linux/of_address.h>
> #include <linux/platform_device.h>
> #include <linux/reset-controller.h>
> +#include <linux/regmap.h>
> #include <linux/slab.h>
> #include <linux/types.h>
>
> @@ -25,8 +27,7 @@
> container_of((p), struct berlin_reset_priv, rcdev)
>
> struct berlin_reset_priv {
> - void __iomem *base;
> - unsigned int size;
> + struct regmap *regmap;
> struct reset_controller_dev rcdev;
> };
>
> @@ -37,7 +38,7 @@ static int berlin_reset_reset(struct reset_controller_dev *rcdev,
> int offset = id >> 8;
> int mask = BIT(id & 0x1f);
>
> - writel(mask, priv->base + offset);
> + regmap_write(priv->regmap, offset, mask);
>
> /* let the reset be effective */
> udelay(10);
> @@ -52,7 +53,6 @@ static struct reset_control_ops berlin_reset_ops = {
> static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
> const struct of_phandle_args *reset_spec)
> {
> - struct berlin_reset_priv *priv = to_berlin_reset_priv(rcdev);
> unsigned offset, bit;
>
> if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
> @@ -61,71 +61,54 @@ static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
> offset = reset_spec->args[0];
> bit = reset_spec->args[1];
>
> - if (offset >= priv->size)
> - return -EINVAL;
> -
> if (bit >= BERLIN_MAX_RESETS)
> return -EINVAL;
>
> return (offset << 8) | bit;
> }
>
> -static int __berlin_reset_init(struct device_node *np)
> +static int berlin2_reset_probe(struct platform_device *pdev)
> {
> + struct device_node *parent_np = of_get_parent(pdev->dev.of_node);
> struct berlin_reset_priv *priv;
> - struct resource res;
> - resource_size_t size;
> - int ret;
>
> - priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> - ret = of_address_to_resource(np, 0, &res);
> - if (ret)
> - goto err;
> -
> - size = resource_size(&res);
> - priv->base = ioremap(res.start, size);
> - if (!priv->base) {
> - ret = -ENOMEM;
> - goto err;
> - }
> - priv->size = size;
> + priv->regmap = syscon_node_to_regmap(parent_np);
> + of_node_put(parent_np);
> + if (IS_ERR(priv->regmap))
> + return PTR_ERR(priv->regmap);
>
> priv->rcdev.owner = THIS_MODULE;
> priv->rcdev.ops = &berlin_reset_ops;
> - priv->rcdev.of_node = np;
> + priv->rcdev.of_node = pdev->dev.of_node;
> priv->rcdev.of_reset_n_cells = 2;
> priv->rcdev.of_xlate = berlin_reset_xlate;
>
> reset_controller_register(&priv->rcdev);
>
> return 0;
> -
> -err:
> - kfree(priv);
> - return ret;
> }
>
> -static const struct of_device_id berlin_reset_of_match[] __initconst = {
> - { .compatible = "marvell,berlin2-chip-ctrl" },
> - { .compatible = "marvell,berlin2cd-chip-ctrl" },
> - { .compatible = "marvell,berlin2q-chip-ctrl" },
> +static const struct of_device_id berlin_reset_of_match[] = {
> + { .compatible = "marvell,berlin2-reset" },
> { },
> };
> +MODULE_DEVICE_TABLE(of, berlin_reset_of_match);
>
> -static int __init berlin_reset_init(void)
> -{
> - struct device_node *np;
> - int ret;
> +static struct platform_driver berlin_reset_driver = {
> + .probe = berlin2_reset_probe,
> + .driver = {
> + .name = "berlin2-reset",
> + .of_match_table = berlin_reset_of_match,
> + },
>
> - for_each_matching_node(np, berlin_reset_of_match) {
> - ret = __berlin_reset_init(np);
> - if (ret)
> - return ret;
> - }
> +};
> +module_platform_driver(berlin_reset_driver);
>
> - return 0;
> -}
> -arch_initcall(berlin_reset_init);
> +MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
> +MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
> +MODULE_DESCRIPTION("Marvell Berlin reset driver");
> +MODULE_LICENSE("GPL");




\
 
 \ /
  Last update: 2015-03-09 11:41    [W:0.610 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site