lkml.org 
[lkml]   [2015]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 13/15] twl4030_charger: add ac/mode to match usb/mode
From
On Tue, Feb 24, 2015 at 6:33 AM, NeilBrown <neilb@suse.de> wrote:
> This allows AC charging to be turned off, much like usb charging.
>
> "continuous" (aka "linear") mode maps to the CVENAC (constant voltage)
> feature of the twl4030.

Are you sure? Before your patches CVENAC was set at all times and and
charger still worked in automatic mode.

>
> Signed-off-by: NeilBrown <neilb@suse.de>
> ---
> drivers/power/twl4030_charger.c | 40 +++++++++++++++++++++++++++++----------
> 1 file changed, 30 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
> index 6c53f0b601a4..e5a0225ea87e 100644
> --- a/drivers/power/twl4030_charger.c
> +++ b/drivers/power/twl4030_charger.c
> @@ -112,7 +112,7 @@ struct twl4030_bci {
> int ichg_eoc, ichg_lo, ichg_hi;
> int usb_cur, ac_cur;
> bool ac_is_active;
> - int usb_mode; /* charging mode requested */
> + int usb_mode, ac_mode; /* charging mode requested */
> #define CHARGE_OFF 0
> #define CHARGE_AUTO 1
> #define CHARGE_LINEAR 2
> @@ -449,12 +449,18 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
> /*
> * Enable/Disable AC Charge funtionality.
> */
> -static int twl4030_charger_enable_ac(bool enable)
> +static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
> {
> int ret;
>
> - if (enable)
> - ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
> + if (bci->ac_mode == CHARGE_OFF)
> + enable = false;
> +
> + if (enable && bci->ac_mode == CHARGE_LINEAR)
> + ret = twl4030_clear_set_boot_bci(0, (TWL4030_CVENAC |
> + TWL4030_BCIAUTOAC));
> + else if (enable)
> + ret = twl4030_clear_set_boot_bci(TWL4030_CVENAC, TWL4030_BCIAUTOAC);
> else
> ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);

CVENAC is required to be set for operation on AC without battery
(which works fine on most pandora boards). After this patch, when
booted without battery, the board will reset before there is a chance
to set the linear mode by userspace, because this is called on
probe...


Gražvydas


\
 
 \ /
  Last update: 2015-03-06 23:01    [W:0.425 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site