lkml.org 
[lkml]   [2015]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] rtc: hym8563: return clock rate even when clock is disabled
Date
When the clock is disabled, do not return a rate of 0 but instead return
the rate the clock will be running at after it gets enabled. This prevents
problems when the core clock code is trying to determine a suitable rate,
while the clock is still off.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
drivers/rtc/rtc-hym8563.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index b936bb4..d4a6561 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -309,7 +309,7 @@ static unsigned long hym8563_clkout_recalc_rate(struct clk_hw *hw,
struct i2c_client *client = hym8563->client;
int ret = i2c_smbus_read_byte_data(client, HYM8563_CLKOUT);

- if (ret < 0 || ret & HYM8563_CLKOUT_DISABLE)
+ if (ret < 0)
return 0;

ret &= HYM8563_CLKOUT_MASK;
--
2.1.4



\
 
 \ /
  Last update: 2015-03-06 11:01    [W:0.188 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site