lkml.org 
[lkml]   [2015]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 1/9] arm64: dts: exynos: Add dts files for 64-bit Exynos5433 SoC
From
Hi,

On Fri, Mar 6, 2015 at 2:04 AM, Mark Rutland <mark.rutland@arm.com> wrote:
> Hi,
>
> [...]
>
>> >> + psci {
>> >> + compatible = "arm,psci";
>> >> + method = "smc";
>> >> + cpu_off = <0x84000002>;
>> >> + cpu_on = <0xC4000003>;
>> >> + };
>> >
>> > Back at v2 you mentioned that CPU_OFF wasn't working [1].
>> >
>> > Do both CPU_ON and CPU_OFF work for all CPUs, including the boot CPU?
>>
>> The CPU1 ~ CPU7 are well woking about CPU_ON/OFF.
>> CPU0 (boot CPU) is only well working for CPU_OFF.
>> But when I try to turn on the CPU0 after CPU_OFF, I failed it.
>
> That's rather worrying. Can you look into what's going on here? I'd
> rather not have dts describing things which are known to be broken.

The board dts don't include any node for CPU_ON/OFF.
When I try to turn on the CPU0 (boot CPU), fail to turn on and lockup happen.
After lockup happen, I cannot use the console.

>
>> > I take it CPUs boot at EL2?
>
> Do the CPUs boot at EL1 or EL2?

Unfortunately, I cannot check the secure firmware for Exynos5433 SoC.
I think that a few SoC provider probably would know it.

[snip]

Thanks,
Chanwoo Choi


\
 
 \ /
  Last update: 2015-03-05 18:41    [W:0.064 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site