lkml.org 
[lkml]   [2015]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/9] ARM: berlin: add nand support
Date
Hi all,

This series introduces the support for the Marvell Berlin nand
controller. It is based on top of v4.0-rc1 and was tested on the
Marvell Berlin BG2Q DMP board.

The support is added into the existing pxa3xx nand controller. Some
additions were done in order to get this controller working:
- Support for a non mandatory ECC clock has been added.
- The Berlin nand controller needs to poll the status register.
- Sequences of commands are quite different in order to perform write
operation.

Thanks!

Antoine

Changes since v2:
- Reworked the timings setup
- Added a explanation in the default chunk size commit
- Ensured commit 4/10 was useless and removed it
- Fixed typos, cosmetic

Changes since v1:
- Added a fallback to NULL when looking for the 'nfc' clock
- Added the clocks in the bindings documentation
- Reworked the DT
- Removed non needed RNDOUT command
- Used the standard RESET command
- Fixed the flash type matching order
- Remove all non tested flash types (only one left)
- Added a check to explicitly not support nand chips with small pages
- Remove useless checks for clocks in the probing function
- Various clean up

Antoine Tenart (9):
mtd: pxa3xx_nand: add a non mandatory ECC clock
Documentation: bindings: document the clocks for pxa3xx-nand
mtd: pxa3xx_nand: add a default chunk size
mtd: pxa3xx_nand: rework timings setup
mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller
Documentation: bindings: add the Berlin nand controller compatible
mtd: nand: let Marvell Berlin SoCs select the pxa3xx driver
ARM: berlin: add BG2Q node for the nand
ARM: berlin: enable flash on the BG2Q DMP

.../devicetree/bindings/mtd/pxa3xx-nand.txt | 5 +
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 25 ++
arch/arm/boot/dts/berlin2q.dtsi | 13 +
drivers/mtd/nand/Kconfig | 2 +-
drivers/mtd/nand/pxa3xx_nand.c | 349 +++++++++++++++++----
include/linux/platform_data/mtd-nand-pxa3xx.h | 2 -
6 files changed, 332 insertions(+), 64 deletions(-)

--
2.3.1



\
 
 \ /
  Last update: 2015-03-05 13:41    [W:0.134 / U:5.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site