lkml.org 
[lkml]   [2015]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] usb: isp1760: fix possible deadlock in isp1760_udc_irq
Date
Hi Sudeep,

Thank you for the patch.

On Wednesday 04 March 2015 17:07:57 Sudeep Holla wrote:
> Use spin_{un,}lock_irq{save,restore} in isp1760_udc_{start,stop} to
> prevent following potentially deadlock scenario between
> isp1760_udc_{start,stop} and isp1760_udc_irq :
>
> =================================
> [ INFO: inconsistent lock state ]
> 4.0.0-rc2-00004-gf7bb2ef60173 #51 Not tainted
> ---------------------------------
> inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
> in:imklog/2118 [HC1[1]:SC0[0]:HE0:SE1] takes:
> (&(&udc->lock)->rlock){?.+...}, at: [<c0397a93>]
> isp1760_udc_irq+0x367/0x9dc {HARDIRQ-ON-W} state was registered at:
> [<c05135b3>] _raw_spin_lock+0x23/0x30
> [<c0396b87>] isp1760_udc_start+0x23/0xf8
> [<c039dc21>] udc_bind_to_driver+0x71/0xb0
> [<c039de4f>] usb_gadget_probe_driver+0x53/0x9c
> [<bf80d0df>] usb_composite_probe+0x8a/0xa4 [libcomposite]
> [<bf8311a7>] 0xbf8311a7
> [<c00088c5>] do_one_initcall+0x8d/0x17c
> [<c050b92d>] do_init_module+0x49/0x148
> [<c0087323>] load_module+0xb7f/0xbc4
> [<c0087471>] SyS_finit_module+0x51/0x74
> [<c000d8c1>] ret_fast_syscall+0x1/0x68
> irq event stamp: 4966
> hardirqs last enabled at (4965): [<c05137df>]
> _raw_spin_unlock_irq+0x1f/0x24 hardirqs last disabled at (4966):
> [<c00110b3>] __irq_svc+0x33/0x64 softirqs last enabled at (4458):
> [<c0023475>] __do_softirq+0x23d/0x2d0 softirqs last disabled at (4389):
> [<c002380b>] irq_exit+0xef/0x15c
>
> other info that might help us debug this:
> Possible unsafe locking scenario:
>
> CPU0
> ----
> lock(&(&udc->lock)->rlock);
> <Interrupt>
> lock(&(&udc->lock)->rlock);
>
> *** DEADLOCK ***
>
> 1 lock held by in:imklog/2118:
> #0: (&f->f_pos_lock){+.+.+.}, at: [<c010a101>] __fdget_pos+0x31/0x34
>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Felipe Balbi <balbi@ti.com>
> ---
> drivers/usb/isp1760/isp1760-udc.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/isp1760/isp1760-udc.c
> b/drivers/usb/isp1760/isp1760-udc.c index 6d618b3fab07..fbfbd59aae64 100644
> --- a/drivers/usb/isp1760/isp1760-udc.c
> +++ b/drivers/usb/isp1760/isp1760-udc.c
> @@ -1191,6 +1191,7 @@ static int isp1760_udc_start(struct usb_gadget
> *gadget, struct usb_gadget_driver *driver)
> {
> struct isp1760_udc *udc = gadget_to_udc(gadget);
> + unsigned long flags;
>
> /* The hardware doesn't support low speed. */
> if (driver->max_speed < USB_SPEED_FULL) {
> @@ -1198,7 +1199,7 @@ static int isp1760_udc_start(struct usb_gadget
> *gadget, return -EINVAL;
> }
>
> - spin_lock(&udc->lock);
> + spin_lock_irqsave(&udc->lock, flags);

Strictly speaking spin_lock_irq() should be enough given that udc_start and
udc_stop are called with interrupts enabled, but I suppose it doesn't hurt to
be safe. I'll let you go with your preference. For both options,

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>
> if (udc->driver) {
> dev_err(udc->isp->dev, "UDC already has a gadget driver\n");
> @@ -1208,7 +1209,7 @@ static int isp1760_udc_start(struct usb_gadget
> *gadget,
>
> udc->driver = driver;
>
> - spin_unlock(&udc->lock);
> + spin_unlock_irqrestore(&udc->lock, flags);
>
> dev_dbg(udc->isp->dev, "starting UDC with driver %s\n",
> driver->function);
> @@ -1232,6 +1233,7 @@ static int isp1760_udc_start(struct usb_gadget
> *gadget, static int isp1760_udc_stop(struct usb_gadget *gadget)
> {
> struct isp1760_udc *udc = gadget_to_udc(gadget);
> + unsigned long flags;
>
> dev_dbg(udc->isp->dev, "%s\n", __func__);
>
> @@ -1239,9 +1241,9 @@ static int isp1760_udc_stop(struct usb_gadget *gadget)
>
> isp1760_udc_write(udc, DC_MODE, 0);
>
> - spin_lock(&udc->lock);
> + spin_lock_irqsave(&udc->lock, flags);
> udc->driver = NULL;
> - spin_unlock(&udc->lock);
> + spin_unlock_irqrestore(&udc->lock, flags);
>
> return 0;
> }

--
Regards,

Laurent Pinchart



\
 
 \ /
  Last update: 2015-03-05 12:01    [W:0.047 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site