Messages in this thread Patch in this message | | | From | Nicolas Ferre <> | Subject | [PATCH] ARM: at91/dt: sama5d4: add pwm device node | Date | Wed, 4 Mar 2015 16:46:37 +0100 |
| |
From: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> --- arch/arm/boot/dts/sama5d4.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 93dc4e374b64..3041baaa19a1 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -64,6 +64,7 @@ gpio2 = &pioC; gpio3 = &pioD; gpio4 = &pioE; + pwm0 = &pwm0; ssc0 = &ssc0; ssc1 = &ssc1; tcb0 = &tcb0; @@ -821,6 +822,15 @@ status = "disabled"; }; + pwm0: pwm@f800c000 { + compatible = "atmel,sama5d3-pwm"; + reg = <0xf800c000 0x300>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + status = "disabled"; + }; + spi0: spi@f8010000 { #address-cells = <1>; #size-cells = <0>; -- 2.1.3
| |