lkml.org 
[lkml]   [2015]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] clk: mediatek: Export CPU mux clocks for CPU frequency control
From
Hi Sascha,

On 4 March 2015 at 19:21, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Wed, Mar 04, 2015 at 06:49:11PM +0800, pi-cheng.chen wrote:
>> This patch adds CPU mux clocks which are used by Mediatek cpufreq driver
>> for intermediate clock source switching. This patch is based on Mediatek
>> clock driver patches[1].
>>
>> [1] http://thread.gmane.org/gmane.linux.kernel/1892436
>>
>> Signed-off-by: pi-cheng.chen <pi-cheng.chen@linaro.org>
>> ---
>> +static long clk_cpumux_determine_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long min_rate,
>> + unsigned long max_rate,
>> + unsigned long *best_parent_rate,
>> + struct clk_hw **best_parent_p)
>> +{
>> + struct clk *clk = hw->clk, *parent;
>> + unsigned long parent_rate;
>> + int i;
>> +
>> + for (i = MAINPLL_INDEX; i >= ARMPLL_INDEX; i--) {
>> + parent = clk_get_parent_by_index(clk, i);
>> + if (!parent)
>> + return 0;
>> +
>> + if (i == MAINPLL_INDEX) {
>> + parent_rate = __clk_get_rate(parent);
>> + if (parent_rate == rate)
>> + break;
>> + }
>> +
>> + parent_rate = __clk_round_rate(parent, rate);
>> + }
>> +
>> + *best_parent_rate = parent_rate;
>> + *best_parent_p = __clk_get_hw(parent);
>> + return parent_rate;
>> +}
>
> Why this determine_rate hook? If you want to switch the clock to some
> intermediate parent I would assume you do this explicitly by setting the
> parent and not implicitly by setting a rate.
>

I use determine_rate hook here because I am using generic cpufreq-dt
driver and I want to make clock switching transparent to cpufreq-dt.
I.e. when I am trying to switch the clock from ARMPLL to MAINPLL, I
call clk_set_rate() with the rate of MAINPLL, and determine_rate will
select MAINPLL as the new parent.

>> +int mtk_clk_register_cpumuxes(struct device_node *node,
>> + struct mtk_composite *clks, int num,
>> + struct clk_onecell_data *clk_data)
>> +{
>> + int i;
>> + struct clk *clk;
>> + struct regmap *regmap;
>> +
>> + if (!clk_data)
>> + return -ENOMEM;
>> +
>> + regmap = syscon_node_to_regmap(node);
>> + if (IS_ERR(regmap)) {
>> + pr_err("Cannot find regmap for %s: %ld\n", node->full_name,
>> + PTR_ERR(regmap));
>> + return PTR_ERR(regmap);
>> + }
>> +
>> + for (i = 0; i < num; i++) {
>> + struct mtk_composite *mux = &clks[i];
>> +
>> + clk = mtk_clk_register_cpumux(mux->name, mux->parent_names,
>> + mux->num_parents, regmap,
>> + mux->mux_reg, mux->mux_shift,
>> + mux->mux_width);
>
> Pass 'mux' directly instead of dispatching this struct into the
> individual fields.
> Also, probably better to move this function to
> drivers/clk/mediatek/clk-cpumux.c

Will do it. Thanks for reviewing.

Best Regards,
Pi-Cheng

>
> Sascha
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2015-03-05 04:01    [W:0.132 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site