lkml.org 
[lkml]   [2015]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 09/15] dt-bindings: Document the STM32 USART bindings
Date
This adds documentation of device tree bindings for the
STM32 USART

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
.../devicetree/bindings/serial/st,stm32-usart.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
new file mode 100644
index 0000000..090a3a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -0,0 +1,32 @@
+* STMicroelectronics STM32 USART
+
+Required properties:
+- compatible: Can be either "st,stm32-usart" or "st,stm32-uart" depending on
+whether the device supports synchronous mode.
+- reg: The address and length of the peripheral registers space
+- interrupts: The interrupt line of the USART instance
+- clocks: The input clock of the USART instance
+
+Optional properties:
+- pinctrl: The reference on the pins configuration
+- st,hw-flow-ctrl: bool flag to enable hardware flow control.
+
+Examples:
+usart4: serial@40004c00 {
+ compatible = "st,stm32-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ clocks = <&clk_pclk1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart4>;
+};
+
+usart2: serial@40004400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ clocks = <&clk_pclk1>;
+ st,hw-flow-ctrl;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>;
+};
--
1.9.1


\
 
 \ /
  Last update: 2015-03-31 19:01    [W:0.389 / U:1.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site