lkml.org 
[lkml]   [2015]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCHv3 0/1] Intel Quark X1000 DTS thermal driver
Date
> -----Original Message-----
> From: Ong, Boon Leong
> Sent: Tuesday, March 31, 2015 7:58 AM
> To: Zhang, Rui; edubezval@gmail.com
> Cc: linux-pm@vger.kernel.org; linux-kernel@vger.kernel.org; Ong, Boon
> Leong; pure.logic@nexus-software.ie; Kweh, Hock Leong;
> andy.shevchenko@gmail.com
> Subject: RE: [PATCHv3 0/1] Intel Quark X1000 DTS thermal driver
>
> Dear maintainer, gentle ping if this driver is ready for more review/inclusion
> into Linux v4.1 ?
> Thank you very much.
>
> >-----Original Message-----
> >From: linux-kernel-owner@vger.kernel.org [mailto:linux-kernel-
> >owner@vger.kernel.org] On Behalf Of Ong Boon Leong
> >Sent: Monday, March 9, 2015 3:43 PM
> >To: Zhang, Rui; edubezval@gmail.com; pure.logic@nexus-software.ie;
> >Kweh, Hock Leong; andy.shevchenko@gmail.com
> >Cc: linux-pm@vger.kernel.org; linux-kernel@vger.kernel.org
> >Subject: [PATCHv3 0/1] Intel Quark X1000 DTS thermal driver
> >
> >Dear maintainers & communities,
> >
> >This patch introduces DTS thermal driver for Intel Quark X1000.
> >The code implementation is based on intel_soc_dts_thermal.c.
> >
> >Intel Quark X1000 has one on-die DTS with two configurable trip points:
> >critical and hot trip points. However, todate, UEFI BIOS for Quark
> >X1000 uses only critical trip point. UEFI BIOS always lock DTS register
> >before hand-over to Linux kernel.
> >
> >The minimalist thermal design is meant to trigger Linux distro to
> >gracefully power-down the system when its DTS temperature exceeds the
> >configured critical trip point.
> >
> >In anticipation that other variant of Quark platform may come with UEFI
> >BIOS that does not lock DTS register during hand-over, this DTS driver
> >is built with logics to handle such case too.
> >
> >I have tested v1 of the patch on Intel Galileo Gen v2 board and found
> >it satisfactory with logs below:
> >
> > root@quark:/sys/class/thermal/thermal_zone0# echo disabled > mode
> > [ 46.276881] intel_quark_dts_thermal: DTS is locked. Cannot disable DTS
> > -sh: echo: write error: Operation not permitted
> > root@quark:/sys/class/thermal/thermal_zone0#
> > root@quark:/sys/class/thermal/thermal_zone0# cat temp
> > 53
> > root@quark:/sys/class/thermal/thermal_zone0# cat trip_point_0_temp
> > 105
> > root@quark:/sys/class/thermal/thermal_zone0# cat trip_point_0_type
> > critical root@quark:/sys/class/thermal/thermal_zone0# cat
> > trip_point_1_temp
> > 20
> > root@quark:/sys/class/thermal/thermal_zone0# cat trip_point_1_type
> > hot root@quark:/sys/class/thermal/thermal_zone0# cat type quark_dts
> >
> > root@quark:/sys/class/thermal/thermal_zone0# echo 105 > emul_temp
> > [ 179.372981] thermal thermal_zone0: critical temperature reached(0
> >C),shutting down
> > root@quark:/sys/class/thermal/thermal_zone0#
> > [ OK ] Stopped target Multi-User System.
> > Stopping Telephony service...
> > Stopping Lightning Fast Webserver With Light System Requirements...
> > Stopping Target Communication Framework agent...
> > Stopping Galileo Arduino Layer...
> > [ OK ] Stopped target Login Prompts.
> > Stopping Getty on tty1...
> > Stopping Serial Getty on ttyS1...
> > Stopping Login Service...
> > Stopping D-Bus System Message Bus...
> > Starting Store Sound Card State...
> > [ OK ] Stopped Telephony service.
> > [ OK ] Stopped Galileo Arduino Layer.
> > [ OK ] Stopped Login Service.
> > [ OK ] Stopped D-Bus System Message Bus.
> > [ OK ] Stopped Target Communication Framework agent.
> > [ OK ] Stopped Lightning Fast Webserver With Light System Requirements.
> > [ OK ] Stopped WPA supplicant.
> > [ OK ] Stopped Getty on tty1.
> > [ OK ] Stopped Serial Getty on ttyS1.
> >
> >Please kindly review the patch at your convenient time and provide me
> >feedback for improvement. Appreciate your time and effort.
> >
> >Thank You
> >Ong Boon Leong
> >Intel Corp.
> >
> >---
> >Changes in v3:
> >* Kconfig dependency changed to X86_INTEL_QUARK
> >
> >Changes in v2:
> >* Fix several commit write-up grammar, choice of words.
> >* Ensure "int ret" in correct order
> >* Add comment to explain DTS register field read/write bit operation
> >* Change to Dual BSD/GPL license
> >* Add logic to ensure safe trip point threshold value being set
> >
> >Ong Boon Leong (1):
> > thermal: intel Quark SoC X1000 DTS thermal driver
> >
> > drivers/thermal/Kconfig | 10
> > drivers/thermal/Makefile | 1
> > drivers/thermal/intel_quark_dts_thermal.c | 434
> >+++++++++++++++++++++++++++++
> > 3 files changed, 445 insertions(+)
> > create mode 100644 drivers/thermal/intel_quark_dts_thermal.c
> >
> >--
> >1.7.9.5
> >
> >--
> >To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> >in the body of a message to majordomo@vger.kernel.org More majordomo
> >info at http://vger.kernel.org/majordomo-info.html
> >Please read the FAQ at http://www.tux.org/lkml/

I am fine with it. Thanks.
Reviewed-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>



\
 
 \ /
  Last update: 2015-03-31 04:41    [W:0.052 / U:1.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site