lkml.org 
[lkml]   [2015]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: arm/ksm: Unable to handle kernel paging request in get_ksm_page() and ksm_scan_thread()
On Mon, 30 Mar 2015, Xishi Qiu wrote:
> On 2015/3/30 9:46, Xishi Qiu wrote:
> > On 2015/3/30 8:43, Hugh Dickins wrote:
> >> On Sat, 28 Mar 2015, Xishi Qiu wrote:
> >>> On 2015/3/26 21:23, Xishi Qiu wrote:
> >>>
> >>>> Here are two panic logs from smart phone test, and the kernel version is v3.10.
> >>>>
> >>>> log1 is "Unable to handle kernel paging request at virtual address c0704da020", it should be ffffffc0704da020, right?
> >>
> >> That one was an oops at get_ksm_page+0x34/0x150: I'm pretty sure that
> >> comes from the "kpfn = ACCESS_ONCE(stable_node->kpfn)" line, that the
> >> stable_node pointer (in x21 or x22) has upper bits cleared; which
> >> suggests corruption of the rmap_item supposed to point to it.
> >>
> >> get_ksm_page() is tricky with ACCESS_ONCEs against page migration,
> >> and the structures tricky with unions; but pointers overlay pointers
> >> in those unions, I don't see any way we might pick up an address with
> >> the upper 24 or 32 bits cleared due to that.
> >>
> >>>> and log2 is "Unable to handle kernel paging request at virtual address 1e000796", it should be ffffffc01e000796, right?
> >>
> >> And this one was an oops at ksm_scan_thread+0x4ac/0xce0; as is the oops
> >> you posted below. Which contains lots of hex numbers, but very little
> >> info I can work from.
> >>
> >> Please make a CONFIG_DEBUG_INFO=y build of one of the kernels you're
> >> hitting this with, then use the disassembler (objdump -ld perhaps) to
> >> identify precisely which line of ksm.c that is oopsing on: the compiler
> >> will have inlined more interesting functions into ksm_scan_thread, so
> >> I haven't a clue where it's actually oopsing.
> >>
> >> Maybe we'll find that it's also oopsing on a kernel virtual address
> >> from an rmap_item, maybe we won't.
> >>
> >> And I don't read arm64 assembler at all, so I shall be rather limited
> >> in what I can tell you, I'm afraid.
> >>
> >>>>
> >>>> I cann't repeat the panic by test, so could anyone tell me this is the
> >>>> bug of ksm or other reason?
> >>
> >> I've not heard of any problem like this with KSM on other architectures.
> >> Maybe it is making some assumption which is invalid on arm64, but I'd
> >> have thought we'd have heard about that before now. My guess is that
> >> something in your kernel is stamping on KSM's structures.
> >>
> >> A relevant experiment (after identifying the oops line in your current
> >> kernel) might be to switch from CONFIG_SLAB=y to CONFIG_SLUB=y or vice
> >> versa. I doubt SLAB or SLUB is to blame, but changing allocator might
> >> shake things up in a way that either hides the problem, or shifts it
> >> elsewhere.
> >>
> >> Hugh
> >>
> >
> > Hi Hugh,
> >
> > Thanks for your reply. There are 3 cases as follows, at first I think maybe
> > something causes the oops, but all of the cases are relevant to "rmap_item",
> > so I have no idea.
> >
> > 1. ksm_scan_thread+0xa88/0xce0 -> unstable_tree_search_insert() -> tree_rmap_item = rb_entry(*new, struct rmap_item, node);
> >
> > 2. ksm_scan_thread+0x4ac/0xce0 -> get_next_rmap_item() -> if ((rmap_item->address & PAGE_MASK) == addr)
> >
> > 3. get_ksm_page+0x34/0x150 -> get_ksm_page() -> kpfn = ACCESS_ONCE(stable_node->kpfn);

So, something is zeroing bytes inside a struct rmap_item.
I say bytes because the pointer in your third dump was ff00000000000000
when it should have been a good struct rmap_item *rmap_list.
But I have no idea what, I'm afraid.

There has to be some reason it's struct rmap_item that's vulnerable;
but I haven't spotted a likely culprit in ksm.c.

If you're using CONFIG_SLUB=y, then "slabinfo -a | grep ksm_rmap_item"
would show what is sharing the same cache as the rmap_items, which may
suggest somewhere to look. (slabinfo comes from tools/vm/slabinfo.c;
I think cache merging has been extended from SLUB to SLAB in later
kernels, but not in v3.10.)

As I said before, it is worth switching SLAB<->SLUB, just to see
what if any difference that makes. Or are you using SLOB (that
might be significant)? If so, please try SLUB or SLAB.

> >
> > Thanks,
> > Xishi Qiu
> >
>
> The kernel is v3.10.59

3.10.61-gxxxxxxx-dirty is what your dumps show, but perhaps you know
that -gxxxxxxx-dirty is taking it back to v3.10.59.

I'd like to think that you've run this test on other kernels, and can
therefore bisect to find where it goes wrong; but suspect I'll be
disappointed to learn this is the first you've tried.

Sorry, no ideas.
Hugh


\
 
 \ /
  Last update: 2015-03-30 07:01    [W:0.045 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site