Messages in this thread | | | Date | Tue, 3 Mar 2015 16:33:43 -0800 | From | Arun Ramamurthy <> | Subject | Re: [PATCH] video: ARM CLCD: Added support for FBIO_WAITFORVSYNC |
| |
On 15-03-02 03:29 PM, Rob Herring wrote: > On Wed, Feb 25, 2015 at 3:01 PM, Arun Ramamurthy > <arun.ramamurthy@broadcom.com> wrote: >> Added ioctl and interrupt handler functions to support FBIO_WAITFORVSYNC >> Also corrected documentation to make interrupts and interrupt-names >> optional as they are not required properties. >> >> Reviewed-by: Ray Jui <rjui@broadcom.com> >> Reviewed-by: Scott Branden <sbranden@broadcom.com> >> Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>0 >> --- >> .../devicetree/bindings/video/arm,pl11x.txt | 11 +-- > > Please split bindings to separate patches. Rob, I looked at the history of patches to this driver and all them included changes to the documentation in the same patch so I followed a similar model. I assumed that a separate patch was only required when the documentation was being added from scratch and not when modifying a few lines. Is this not the case? > >> drivers/video/fbdev/amba-clcd.c | 82 ++++++++++++++++++++++ >> include/linux/amba/clcd.h | 4 ++ >> 3 files changed, 89 insertions(+), 8 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt b/Documentation/devicetree/bindings/video/arm,pl11x.txt >> index 2262cdb..7d19024 100644 >> --- a/Documentation/devicetree/bindings/video/arm,pl11x.txt >> +++ b/Documentation/devicetree/bindings/video/arm,pl11x.txt >> @@ -10,14 +10,6 @@ Required properties: >> >> - reg: base address and size of the control registers block >> >> -- interrupt-names: either the single entry "combined" representing a >> - combined interrupt output (CLCDINTR), or the four entries >> - "mbe", "vcomp", "lnbu", "fuf" representing the individual >> - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts >> - >> -- interrupts: contains an interrupt specifier for each entry in >> - interrupt-names >> - >> - clock-names: should contain "clcdclk" and "apb_pclk" >> >> - clocks: contains phandle and clock specifier pairs for the entries >> @@ -54,6 +46,9 @@ Optional properties: >> It can be used to configure a virtual y resolution. It >> must be a value larger than the actual y resolution. >> >> +- interrupts: contains an interrupt specifier for the clcd vcomp interrupt >> + This is required for the driver to handle FBIO_WAITFORVSYNC ioctls. >> + > > What happened to interrupt-names? As mentioned before, these changes to the documentation will be undone in V2. Thanks > > Rob >
| |