lkml.org 
[lkml]   [2015]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: gadgetfs broken since 7f7f25e8
On Tue, 3 Mar 2015, Al Viro wrote:

> Looking at that thing again... why do they need to be dummy? After all,
> those methods start with get_ready_ep(), which will fail unless we have
> ->state == STATE_EP_ENABLED. So they'd be failing just fine until that
> first write() anyway. Let's do the following:

In addition to the changes you made, it looks like you will need the
following or something similar (also untested). I'm not sure if this
is race-free, but it's better than before.

Alan Stern



Index: usb-3.19/drivers/usb/gadget/legacy/inode.c
===================================================================
--- usb-3.19.orig/drivers/usb/gadget/legacy/inode.c
+++ usb-3.19/drivers/usb/gadget/legacy/inode.c
@@ -987,6 +987,10 @@ ep0_read (struct file *fd, char __user *
enum ep0_state state;

spin_lock_irq (&dev->lock);
+ if (dev->state <= STATE_DEV_OPENED) {
+ retval = -ENODEV;
+ goto done;
+ }

/* report fd mode change before acting on it */
if (dev->setup_abort) {
@@ -1185,8 +1189,6 @@ ep0_write (struct file *fd, const char _
struct dev_data *dev = fd->private_data;
ssize_t retval = -ESRCH;

- spin_lock_irq (&dev->lock);
-
/* report fd mode change before acting on it */
if (dev->setup_abort) {
dev->setup_abort = 0;
@@ -1232,7 +1234,6 @@ ep0_write (struct file *fd, const char _
} else
DBG (dev, "fail %s, state %d\n", __func__, dev->state);

- spin_unlock_irq (&dev->lock);
return retval;
}

@@ -1240,6 +1241,10 @@ static int
ep0_fasync (int f, struct file *fd, int on)
{
struct dev_data *dev = fd->private_data;
+
+ if (dev->state <= STATE_DEV_OPENED)
+ return -ENODEV;
+
// caller must F_SETOWN before signal delivery happens
VDEBUG (dev, "%s %s\n", __func__, on ? "on" : "off");
return fasync_helper (f, fd, on, &dev->fasync);
@@ -1279,6 +1284,9 @@ ep0_poll (struct file *fd, poll_table *w
struct dev_data *dev = fd->private_data;
int mask = 0;

+ if (dev->state <= STATE_DEV_OPENED)
+ return -ENODEV;
+
poll_wait(fd, &dev->wait, wait);

spin_lock_irq (&dev->lock);
@@ -1314,19 +1322,6 @@ static long dev_ioctl (struct file *fd,
return ret;
}

-/* used after device configuration */
-static const struct file_operations ep0_io_operations = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
-
- .read = ep0_read,
- .write = ep0_write,
- .fasync = ep0_fasync,
- .poll = ep0_poll,
- .unlocked_ioctl = dev_ioctl,
- .release = dev_release,
-};
-
/*----------------------------------------------------------------------*/

/* The in-kernel gadget driver handles most ep0 issues, in particular
@@ -1850,6 +1845,14 @@ dev_config (struct file *fd, const char
u32 tag;
char *kbuf;

+ spin_lock_irq(&dev->lock);
+ if (dev->state > STATE_DEV_OPENED) {
+ value = ep0_write(fd, buf, len, ptr);
+ spin_unlock_irq(&dev->lock);
+ return value;
+ }
+ spin_unlock_irq(&dev->lock);
+
if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
return -EINVAL;

@@ -1923,7 +1926,6 @@ dev_config (struct file *fd, const char
* on, they can work ... except in cleanup paths that
* kick in after the ep0 descriptor is closed.
*/
- fd->f_op = &ep0_io_operations;
value = len;
}
return value;
@@ -1954,12 +1956,14 @@ dev_open (struct inode *inode, struct fi
return value;
}

-static const struct file_operations dev_init_operations = {
+static const struct file_operations ep0_operations = {
.llseek = no_llseek,

.open = dev_open,
+ .read = ep0_read,
.write = dev_config,
.fasync = ep0_fasync,
+ .poll = ep0_poll,
.unlocked_ioctl = dev_ioctl,
.release = dev_release,
};
@@ -2075,7 +2079,7 @@ gadgetfs_fill_super (struct super_block
goto Enomem;

dev->sb = sb;
- dev->dentry = gadgetfs_create_file(sb, CHIP, dev, &dev_init_operations);
+ dev->dentry = gadgetfs_create_file(sb, CHIP, dev, &ep0_operations);
if (!dev->dentry) {
put_dev(dev);
goto Enomem;


\
 
 \ /
  Last update: 2015-03-03 17:01    [W:0.099 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site