lkml.org 
[lkml]   [2015]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V5 0/2] add support for pmic_arb v2 and correct framework
From
Date

On Wed, 2015-03-25 at 11:37 -0600, Gilad Avidov wrote:
> pmic_arb v2 has no support for spmi non-data commands and thus
> returns -EOPNOTSUPP on .cmd callback. This causes a failure in
> spmi_drv_probe() which sends a wakeup command to the slave before
> probing its driver. This patchset removes the wakeup from
> spmi_drv_probe() since the spmi spec stipulates that a slaves
> default state is active and doesn't need a wakeup.
>
> Changes from v3 to v4:
> * Remove the claim that this is a bug fix off the commit text
> * Unmap the core register space as soon as we know that it will not be used
> * Assign the core reg space to a local until we know if it appropriate to use
> it to configure the controller fields (on v1) or unmap it (on v2).
>
> Changes from v4 to v5:
> * remove the unmap added in v4 since it is used again and the mapping is managed.
> * correct printf formatting for 64bit compilers.
> * correct base address for reading the channel table.
>
> Gilad Avidov (2):
> spmi: remove wakeup command before slave probe
> spmi: pmic_arb: add support for hw version 2

Thank you Gilad. This is fine now. Tested on APQ8084
(controller v1) and MSM8916 (controller v2).

I am wandering which is the appropriate tree to merge this?

Kumar?

Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>



\
 
 \ /
  Last update: 2015-03-26 11:01    [W:0.064 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site