lkml.org 
[lkml]   [2015]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] rtlwifi: rtl8192cu: Add new device ID
On 03/25/2015 04:18 PM, Marek Vasut wrote:
> Add new ID for ASUS N10 WiFi dongle.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Larry Finger <Larry.Finger@lwfinger.net>
> Cc: John W. Linville <linville@tuxdriver.com>
> Cc: Chaoming Li <chaoming_li@realsil.com.cn>
> ---
> drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> Bus 001 Device 004: ID 0b05:17ba ASUSTek Computer, Inc.
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0b05 ASUSTek Computer, Inc.
> idProduct 0x17ba
> bcdDevice 2.00
> iManufacturer 1 Realtek
> iProduct 2 802.11n WLAN Adapter
> iSerial 3 00e04c000001
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 46
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> index 90a714c..d451d2b 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> @@ -360,6 +360,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
> {RTL_USB_DEVICE(0x04f2, 0xaffb, rtl92cu_hal_cfg)}, /*Xavi*/
> {RTL_USB_DEVICE(0x04f2, 0xaffc, rtl92cu_hal_cfg)}, /*Xavi*/
> {RTL_USB_DEVICE(0x2019, 0x1201, rtl92cu_hal_cfg)}, /*Planex-Vencer*/
> + {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
>
> /****** 8192CU ********/
> {RTL_USB_DEVICE(0x050d, 0x1004, rtl92cu_hal_cfg)}, /*Belcom-SurfN300*/
>

The full dump from lsusb is a bit much for a commit message. All you need is the
one line from lsusb with no switches set.

According to the Vendor driver, which the comment indicates as the source of
part of your patch, this particular device belongs in the "Customer ID" section
under 8188CU, not where you placed it. In addition, I like to keep the USB IDs
in numerical order within each section. Accordingly, your new ID should be
between 0846:9041 and 0bda:5088.

I am assuming that you have such a device. A statement that this change allows
it to work should be in the commit message. If you have not tested, then you
need to state that.

Larry



\
 
 \ /
  Last update: 2015-03-26 02:01    [W:0.063 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site