lkml.org 
[lkml]   [2015]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] toshiba_bluetooth: Remove BT enable code from *_notify function
On Wed, Mar 25, 2015 at 02:19:17PM -0600, Azael Avalos wrote:
> Bug 93911 reported a broken handling of the BT device, causing the
> driver to get stuck in a loop enabling/disabling the device whenever
> the device is deactivated by the kill switch as follows:
>
> 1. The user activated the kill switch, causing the system to generate
> a 0x90 (status change) event and disabling the BT device.
> 2. The driver catches the event and re-enables the BT device.
> 3. The system detects the device being activated, but since the kill
> switch is activated, disables the BT device (again) and generates
> a 0x90 event (again).
> 4. Repeat from 2.
>
> This patch acts according to the BT device status, activating the
> device only when it is disabled and returning silently if the KS is
> activated, this way we retain the previous functionality but without
> affecting the newer devices that trigger the enable/disable loop.
>
> Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
> ---
> drivers/platform/x86/toshiba_bluetooth.c | 26 +++++++++++++++++++++++++-
> 1 file changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c
> index 0343d20..94bec3c 100644
> --- a/drivers/platform/x86/toshiba_bluetooth.c
> +++ b/drivers/platform/x86/toshiba_bluetooth.c
> @@ -2,6 +2,7 @@
> * Toshiba Bluetooth Enable Driver
> *
> * Copyright (C) 2009 Jes Sorensen <Jes.Sorensen@gmail.com>
> + * Copyright (C) 2015 Azael Avalos <coproscefalo@gmail.com>
> *
> * Thanks to Matthew Garrett for background info on ACPI innards which
> * normal people aren't meant to understand :-)
> @@ -25,6 +26,10 @@
> #include <linux/types.h>
> #include <linux/acpi.h>
>
> +#define BT_KILLSWITCH_MASK 0x01
> +#define BT_PLUGGED_MASK 0x40
> +#define BT_POWER_MASK 0x80
> +
> MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@gmail.com>");
> MODULE_DESCRIPTION("Toshiba Laptop ACPI Bluetooth Enable Driver");
> MODULE_LICENSE("GPL");
> @@ -135,7 +140,26 @@ static int toshiba_bluetooth_disable(acpi_handle handle)
>
> static void toshiba_bt_rfkill_notify(struct acpi_device *device, u32 event)
> {
> - toshiba_bluetooth_enable(device->handle);
> + bool killswitch;
> + bool powered;
> + bool plugged;
> + int status;
> +
> + /* Query the status of the Bluetooth device */
> + status = toshiba_bluetooth_status(device->handle);
> + if (status < 0)
> + return;
> +
> + killswitch = (status & BT_KILLSWITCH_MASK) ? true : false;
> + powered = (status & BT_POWER_MASK) ? true : false;
> + plugged = (status & BT_PLUGGED_MASK) ? true : false;
> +
> + /* Verify RFKill switch is set to on, if not, we return silently. */
> + if (!killswitch)
> + return;
> + /* Check if the device is not powered or attached and the KS is off */
> + if (killswitch && (!powered || !plugged))
> + toshiba_bluetooth_enable(device->handle);

The second check for killswitch isn't necessary, or it could be a single
conditional.

The difference here from the test in *_enable() is that you ALSO check for
!powered || !plugged, while *_enable() only tests for killswitch.

This set of tests is thus partially redundant with *_enable().

Let's identify how *_enable() is used. There are three cases as I understand it.
I'll describe them as I understand them, correct me if I get something wrong.

1) toshiba_bt_rfkill_add()
2) toshiba_bt_rfkill_notify()
3) toshiba_bt_resume()

This covers the initial scan of the DSDT (and potentially subsequent ones for
hotplug) via "add", it covers rfkill change events, and resume from suspend.

We apparently don't know when the firmware may handle the AUSB and BTPO by
itself and when we need to call it explicitly without testing for the rfkill,
powered, and plugged status explicitly. It seems possible that some systems may
handle this for us at power on or at resume, just as they do for changes to
rfkill.

That suggests to me the checks for rfkill, powered, and plugged states should be
done in the _enable() function itself, rather than at all the call sites.

So... would a better fix be to push these two additional tests into
toshiba_bluetooth_enable() before it calls AUSB and BTPO and then retain the
call the _enable() here?

Thanks,

--
Darren Hart
Intel Open Source Technology Center


\
 
 \ /
  Last update: 2015-03-25 22:41    [W:0.565 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site