lkml.org 
[lkml]   [2015]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] IIO: Adds ACPI support for ST gyroscopes
On Wed, Mar 25, 2015 at 11:43:27AM +0200, Mika Westerberg wrote:
> On Wed, Mar 25, 2015 at 09:44:34AM +0100, Linus Walleij wrote:
> > On Tue, Mar 24, 2015 at 4:06 PM, Mika Westerberg
> > <mika.westerberg@linux.intel.com> wrote:
> >
> > > This has few problems that I have not yet figured out. Maybe someone
> > > here can suggest what to do:
> > >
> > > 1) Who is responsible in releasing the GPIO?
> > > 2) What if the driver wants to use that pin as a GPIO instead? The GPIO
> > > is already requested by the I2C core.
> >
> > In the DT usecase we actually specify that in the DTS file
> > so we don't have the problem. Either the consumer accesses
> > the irqchip API with:
> >
> > interrupts = <nn nn>;
> >
> > or it accesses the GPIO API with:
> >
> > gpios = <nn nn>;
>
> OK, I see.
>
> > so in that sense it is clear what is requested. Then the core
> > of course uses gpiochip_lock/unlock_as_irq() to handle the
> > case where bugs make a collision (like if both were specified
> > and both APIs tries to access the same resource).
>
> Where in the core code gpiochip_lock/unlock_as_irq() is called for
> these? At least of_irq_get() doesn't seem to be doing that. Maybe I'm
> looking at the wrong place.

Answering my own question: of_irq_get() just translates the IRQ number
to the corresponding Linux IRQ number. Then when a driver calls
request_irq() irqchip callbacks for this GPIO controller (or generic
GPIO irqchip helpers) will lock the GPIO as IRQ.

I think we can do the same for ACPI GpioInts so that we introduce
acpi_gpio_irq_get() that translates from GpioInt to Linux IRQ
numberspace. Then we can do something like below in I2C core:

if (client->irq <= 0) {
int irq = -ENOENT;

if (dev->of_node)
irq = of_irq_get(dev->of_node, 0);
else if (ACPI_COMPANION(dev))
irq = acpi_gpio_irq_get(ACPI_COMPANION(dev), 0);

if (irq == -EPROBE_DEFER)
return irq;
if (irq < 0)
irq = 0;

client->irq = irq;
}

Now it has the drawback that the first GpioInt will not be available to
the driver anymore (as a GPIO since it is locked) but if DT already does
the same we should be fine.


\
 
 \ /
  Last update: 2015-03-25 13:41    [W:0.085 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site