lkml.org 
[lkml]   [2015]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] Add virtio-input driver.
On Tue, Mar 24, 2015 at 11:36:31AM +0100, Michael S. Tsirkin wrote:
> On Tue, Mar 24, 2015 at 08:32:01AM +0100, Gerd Hoffmann wrote:
> > virtio-input is basically evdev-events-over-virtio, so this driver isn't
> > much more than reading configuration from config space and forwarding
> > incoming events to the linux input layer.
> >
> > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
>
> Looks pretty neat overall. I think I still see some
> small issues, but it's getting there.
>
> > ---
> > MAINTAINERS | 6 +
> > drivers/virtio/Kconfig | 10 ++
> > drivers/virtio/Makefile | 1 +
> > drivers/virtio/virtio_input.c | 313 ++++++++++++++++++++++++++++++++++++++
> > include/uapi/linux/Kbuild | 1 +
> > include/uapi/linux/virtio_ids.h | 1 +
> > include/uapi/linux/virtio_input.h | 76 +++++++++
> > 7 files changed, 408 insertions(+)
> > create mode 100644 drivers/virtio/virtio_input.c
> > create mode 100644 include/uapi/linux/virtio_input.h
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 358eb01..6f233dd 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -10442,6 +10442,12 @@ S: Maintained
> > F: drivers/vhost/
> > F: include/uapi/linux/vhost.h
> >
> > +VIRTIO INPUT DRIVER
> > +M: Gerd Hoffmann <kraxel@redhat.com>
> > +S: Maintained
> > +F: drivers/virtio/virtio_input.c
> > +F: include/uapi/linux/virtio_input.h
> > +
> > VIA RHINE NETWORK DRIVER
> > M: Roger Luethi <rl@hellgate.ch>
> > S: Maintained
> > diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> > index b546da5..cab9f3f 100644
> > --- a/drivers/virtio/Kconfig
> > +++ b/drivers/virtio/Kconfig
> > @@ -48,6 +48,16 @@ config VIRTIO_BALLOON
> >
> > If unsure, say M.
> >
> > +config VIRTIO_INPUT
> > + tristate "Virtio input driver"
> > + depends on VIRTIO
> > + depends on INPUT
> > + ---help---
> > + This driver supports virtio input devices such as
> > + keyboards, mice and tablets.
> > +
> > + If unsure, say M.
> > +
> > config VIRTIO_MMIO
> > tristate "Platform bus driver for memory mapped virtio devices"
> > depends on HAS_IOMEM
> > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > index d85565b..41e30e3 100644
> > --- a/drivers/virtio/Makefile
> > +++ b/drivers/virtio/Makefile
> > @@ -4,3 +4,4 @@ obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
> > obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
> > +obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
> > diff --git a/drivers/virtio/virtio_input.c b/drivers/virtio/virtio_input.c
> > new file mode 100644
> > index 0000000..cf112b2
> > --- /dev/null
> > +++ b/drivers/virtio/virtio_input.c
> > @@ -0,0 +1,313 @@
> > +#include <linux/module.h>
> > +#include <linux/virtio.h>
> > +#include <linux/input.h>
> > +
> > +#include <uapi/linux/virtio_ids.h>
> > +#include <uapi/linux/virtio_input.h>
> > +
> > +struct virtio_input {
> > + struct virtio_device *vdev;
> > + struct input_dev *idev;
> > + char name[64];
> > + char serial[64];
> > + char phys[64];
> > + struct virtqueue *evt, *sts;
> > + struct virtio_input_event evts[64];
> > + spinlock_t lock;
> > +};
> > +
> > +static void virtinput_queue_evtbuf(struct virtio_input *vi,
> > + struct virtio_input_event *evtbuf)
> > +{
> > + struct scatterlist sg[1];
> > +
> > + sg_init_one(sg, evtbuf, sizeof(*evtbuf));
> > + virtqueue_add_inbuf(vi->evt, sg, 1, evtbuf, GFP_ATOMIC);
> > +}
> > +
> > +static void virtinput_recv_events(struct virtqueue *vq)
> > +{
> > + struct virtio_input *vi = vq->vdev->priv;
> > + struct virtio_input_event *event;
> > + unsigned long flags;
> > + unsigned int len;
> > +
> > + spin_lock_irqsave(&vi->lock, flags);
> > + while ((event = virtqueue_get_buf(vi->evt, &len)) != NULL) {
> > + input_event(vi->idev,
> > + le16_to_cpu(event->type),
> > + le16_to_cpu(event->code),
> > + le32_to_cpu(event->value));
>
> What happens if input layer gets an
> unexpected event code or value?
> Or does something prevent it?
>
>
>
> > + virtinput_queue_evtbuf(vi, event);
> > + }
> > + virtqueue_kick(vq);
> > + spin_unlock_irqrestore(&vi->lock, flags);
> > +}
> > +
> > +static int virtinput_send_status(struct virtio_input *vi,
> > + u16 type, u16 code, s32 value)
> > +{
> > + struct virtio_input_event *stsbuf;
> > + struct scatterlist sg[1];
> > + unsigned long flags;
> > + int rc;
> > +
> > + stsbuf = kzalloc(sizeof(*stsbuf), GFP_ATOMIC);
> > + if (!stsbuf)
> > + return -ENOMEM;
> > +
> > + stsbuf->type = cpu_to_le16(type);
> > + stsbuf->code = cpu_to_le16(code);
> > + stsbuf->value = cpu_to_le32(value);
> > + sg_init_one(sg, stsbuf, sizeof(*stsbuf));
> > +
> > + spin_lock_irqsave(&vi->lock, flags);
> > + rc = virtqueue_add_outbuf(vi->sts, sg, 1, stsbuf, GFP_ATOMIC);
> > + virtqueue_kick(vi->sts);
> > + spin_unlock_irqrestore(&vi->lock, flags);

I think locking is wrong here. This is basically input_dev->event()
which is called with input_dev->event_lock spinlock held, and it is
taking vi->lock. OTOH virtinput_recv_events() takes vi->lock and then
calls input_event(), which will try taking input_dev->event_lock. It is
bound to deadlock at some point.

I guess the easiest way would be to drop vi->lock() after fetching
virtio event and before calling input_event().

> > +
> > + if (rc != 0)
> > + kfree(stsbuf);
> > + return rc;
>
> This means that caller will get errors if it happens to call
> send_status at a rate that's faster than host's consumption of them.
> To me this looks wrong.
> Poking at input layer, it seems to simply discard errors.
> Is it always safe to discard status updates?
> If yes, some kind of comment to clarify the logic would
> make sense IMHO.
>
>
>
> > +}
> > +
> > +static void virtinput_recv_status(struct virtqueue *vq)
> > +{
> > + struct virtio_input *vi = vq->vdev->priv;
> > + struct virtio_input_event *stsbuf;
> > + unsigned long flags;
> > + unsigned int len;
> > +
> > + spin_lock_irqsave(&vi->lock, flags);
> > + while ((stsbuf = virtqueue_get_buf(vi->sts, &len)) != NULL)
> > + kfree(stsbuf);
> > + spin_unlock_irqrestore(&vi->lock, flags);
> > +}
> > +
> > +static int virtinput_status(struct input_dev *idev, unsigned int type,
> > + unsigned int code, int value)
> > +{
> > + struct virtio_input *vi = input_get_drvdata(idev);
> > +
> > + return virtinput_send_status(vi, type, code, value);
> > +}
> > +
> > +static size_t virtinput_cfg_select(struct virtio_input *vi,
> > + u8 select, u8 subsel)
> > +{
> > + u8 size;
> > +
> > + virtio_cwrite(vi->vdev, struct virtio_input_config, select, &select);
> > + virtio_cwrite(vi->vdev, struct virtio_input_config, subsel, &subsel);
> > + virtio_cread(vi->vdev, struct virtio_input_config, size, &size);
> > + return size;
> > +}
> > +
> > +static void virtinput_cfg_bits(struct virtio_input *vi, int select, int subsel,
> > + unsigned long *bits, unsigned int bitcount)
> > +{
> > + unsigned int bit;
> > + size_t bytes;
> > + u8 *virtio_bits;
> > +
> > + bytes = virtinput_cfg_select(vi, select, subsel);
> > + if (!bytes)
> > + return;
>
> How about limiting bytes to sizeof struct virtio_input_config->u?
>
> > + if (bitcount > bytes*8)
> > + bitcount = bytes*8;
>
> Space around * pls.
>
> > +
> > + /*
> > + * Bitmap in virtio config space is a simple stream of bytes,
> > + * with the first byte carrying bits 0-7, second bits 8-15 and
> > + * so on.
> > + */
> > + virtio_bits = kzalloc(bytes, GFP_KERNEL);
> > + if (!virtio_bits)
> > + return;
> > + virtio_cread_bytes(vi->vdev, offsetof(struct virtio_input_config, u),
> > + virtio_bits, bytes);
> > + for (bit = 0; bit < bitcount; bit++) {
> > + if (virtio_bits[bit / 8] & (1 << (bit % 8)))
> > + __set_bit(bit, bits);
> > + }
> > + kfree(virtio_bits);
> > +
> > + if (select == VIRTIO_INPUT_CFG_EV_BITS)
> > + __set_bit(subsel, vi->idev->evbit);
> > +}
> > +
> > +static void virtinput_cfg_abs(struct virtio_input *vi, int abs)
> > +{
> > + u32 mi, ma, re, fu, fl;
> > +
> > + virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_ABS_INFO, abs);
> > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.min, &mi);
> > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.max, &ma);
> > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.res, &re);
> > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.fuzz, &fu);
> > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.flat, &fl);
> > + input_set_abs_params(vi->idev, abs, mi, ma, fu, fl);
> > + input_abs_set_res(vi->idev, abs, re);
> > +}
> > +
> > +static int virtinput_init_vqs(struct virtio_input *vi)
> > +{
> > + struct virtqueue *vqs[2];
> > + vq_callback_t *cbs[] = { virtinput_recv_events,
> > + virtinput_recv_status };
> > + static const char * names[] = { "events", "status" };
>
> No space between * and names expected
>
> > + int i, err, size;
> > +
> > + err = vi->vdev->config->find_vqs(vi->vdev, 2, vqs, cbs, names);
> > + if (err)
> > + return err;
> > + vi->evt = vqs[0];
> > + vi->sts = vqs[1];
> > +
> > + size = virtqueue_get_vring_size(vi->evt);
> > + if (size > ARRAY_SIZE(vi->evts))
> > + size = ARRAY_SIZE(vi->evts);
> > + for (i = 0; i < size; i++)
> > + virtinput_queue_evtbuf(vi, &vi->evts[i]);
> > + virtqueue_kick(vi->evt);
> > +
> > + return 0;
> > +}
> > +
> > +static int virtinput_probe(struct virtio_device *vdev)
> > +{
> > + struct virtio_input *vi;
> > + size_t size;
> > + int abs, err;
> > +
> > + if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
> > + return -ENODEV;
> > +
> > + vi = kzalloc(sizeof(*vi), GFP_KERNEL);
> > + if (!vi)
> > + return -ENOMEM;
> > +
> > + vdev->priv = vi;
> > + vi->vdev = vdev;
> > + spin_lock_init(&vi->lock);
> > +
> > + err = virtinput_init_vqs(vi);
> > + if (err)
> > + goto err_init_vq;
> > +
> > + vi->idev = input_allocate_device();
> > + if (!vi->idev) {
> > + err = -ENOMEM;
> > + goto err_input_alloc;
> > + }
> > + input_set_drvdata(vi->idev, vi);
> > +
> > + size = virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_ID_NAME, 0);
> > + virtio_cread_bytes(vi->vdev, offsetof(struct virtio_input_config, u),
> > + vi->name, min(size, sizeof(vi->name)));
> > + size = virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_ID_SERIAL, 0);
> > + virtio_cread_bytes(vi->vdev, offsetof(struct virtio_input_config, u),
> > + vi->serial, min(size, sizeof(vi->serial)));
> > + snprintf(vi->phys, sizeof(vi->phys),
> > + "virtio%d/input0", vdev->index);
> > + vi->idev->name = vi->name;
> > + vi->idev->phys = vi->phys;
> > + vi->idev->uniq = vi->serial;
> > +
> > + size = virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_ID_DEVIDS, 0);
> > + if (size >= 8) {
>
> What does 8 mean here? Should be sizeof virtio_input_devids?
>
> > + virtio_cread(vi->vdev, struct virtio_input_config,
> > + u.ids.bustype, &vi->idev->id.bustype);
> > + virtio_cread(vi->vdev, struct virtio_input_config,
> > + u.ids.vendor, &vi->idev->id.vendor);
> > + virtio_cread(vi->vdev, struct virtio_input_config,
> > + u.ids.product, &vi->idev->id.product);
> > + virtio_cread(vi->vdev, struct virtio_input_config,
> > + u.ids.version, &vi->idev->id.version);
> > + } else {
> > + vi->idev->id.bustype = BUS_VIRTUAL;
> > + }
> > +
> > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_PROP_BITS, 0,
> > + vi->idev->propbit, INPUT_PROP_CNT);
> > + size = virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_REP);
> > + if (size)
> > + __set_bit(EV_REP, vi->idev->evbit);
> > +
> > + vi->idev->dev.parent = &vdev->dev;
> > + vi->idev->event = virtinput_status;
> > +
> > + /* device -> kernel */
> > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_KEY,
> > + vi->idev->keybit, KEY_CNT);
> > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_REL,
> > + vi->idev->relbit, REL_CNT);
> > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_ABS,
> > + vi->idev->absbit, ABS_CNT);
> > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_MSC,
> > + vi->idev->mscbit, MSC_CNT);
> > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_SW,
> > + vi->idev->swbit, SW_CNT);
> > +
> > + /* kernel -> device */
> > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_LED,
> > + vi->idev->ledbit, LED_CNT);
> > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_SND,
> > + vi->idev->sndbit, SND_CNT);
> > +
> > + if (test_bit(EV_ABS, vi->idev->evbit)) {
> > + for (abs = 0; abs < ABS_CNT; abs++) {
> > + if (!test_bit(abs, vi->idev->absbit))
> > + continue;
> > + virtinput_cfg_abs(vi, abs);
> > + }
> > + }
> > + virtio_device_ready(vdev);
> > +
> At this point you can already get interrupts.
> This will cause events to be forwarded.
> I'm guessing this is ok since you called
> input_allocate_device, but worth checking,
> and maybe adding a comment.

Yes, it is OK to send events though yet unregistered input device, as
long as it was allocated with input_allocate_device().

>
> > + err = input_register_device(vi->idev);
> > + if (err)
> > + goto err_input_register;
> > +
> > + return 0;
> > +
> > +err_input_register:
>
> > + input_free_device(vi->idev);
>
> At this point you can already get interrupts
> since you called virtio_device_ready, and
> getting events from a freed device likely won't
> DTRT.

Right. I guess you want to mark the virtio device ready only after
registering input device.

>
> > +err_input_alloc:
> > + vdev->config->del_vqs(vdev);
> > +err_init_vq:
> > + kfree(vi);
> > + return err;
> > +}
> > +
> > +static void virtinput_remove(struct virtio_device *vdev)
> > +{
> > + struct virtio_input *vi = vdev->priv;
> > +
> > + input_unregister_device(vi->idev);
>
> same thing here, you might get an event at this point.
> You need to somehow block new events
> being sent to device while keeping
> device around.
>
> Since you already do everything under a spinlock,
> it's probably easiest to add a flag discarding
> recv events. You can then check it in virtinput_recv_events
> before calling input_event.

Instead of checking the flag is it possible to pause virio device? Maybe
virtio_break_device()?

>
>
>
> > + vdev->config->del_vqs(vdev);
> > + kfree(vi);
> > +}
> > +
> > +static unsigned int features[] = {
> > +};
> > +static struct virtio_device_id id_table[] = {
> > + { VIRTIO_ID_INPUT, VIRTIO_DEV_ANY_ID },
> > + { 0 },
> > +};
> > +
> > +static struct virtio_driver virtio_input_driver = {
> > + .driver.name = KBUILD_MODNAME,
> > + .driver.owner = THIS_MODULE,
> > + .feature_table = features,
> > + .feature_table_size = ARRAY_SIZE(features),
> > + .id_table = id_table,
> > + .probe = virtinput_probe,
> > + .remove = virtinput_remove,
>
> I note this driver doesn't seem to handle hybernation,
> that's probably a bug?
>
>
> > +};
> > +
> > +module_virtio_driver(virtio_input_driver);
> > +MODULE_DEVICE_TABLE(virtio, id_table);
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_DESCRIPTION("Virtio input device driver");
> > +MODULE_AUTHOR("Gerd Hoffmann <kraxel@redhat.com>");
> > diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
> > index 68ceb97..04b829e 100644
> > --- a/include/uapi/linux/Kbuild
> > +++ b/include/uapi/linux/Kbuild
> > @@ -430,6 +430,7 @@ header-y += virtio_blk.h
> > header-y += virtio_config.h
> > header-y += virtio_console.h
> > header-y += virtio_ids.h
> > +header-y += virtio_input.h
> > header-y += virtio_net.h
> > header-y += virtio_pci.h
> > header-y += virtio_ring.h
> > diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
> > index 284fc3a..5f60aa4 100644
> > --- a/include/uapi/linux/virtio_ids.h
> > +++ b/include/uapi/linux/virtio_ids.h
> > @@ -39,5 +39,6 @@
> > #define VIRTIO_ID_9P 9 /* 9p virtio console */
> > #define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */
> > #define VIRTIO_ID_CAIF 12 /* Virtio caif */
> > +#define VIRTIO_ID_INPUT 18 /* virtio input */
> >
> > #endif /* _LINUX_VIRTIO_IDS_H */
> > diff --git a/include/uapi/linux/virtio_input.h b/include/uapi/linux/virtio_input.h
> > new file mode 100644
> > index 0000000..7fceabd
> > --- /dev/null
> > +++ b/include/uapi/linux/virtio_input.h
> > @@ -0,0 +1,76 @@
> > +#ifndef _LINUX_VIRTIO_INPUT_H
> > +#define _LINUX_VIRTIO_INPUT_H
> > +/* This header is BSD licensed so anyone can use the definitions to implement
> > + * compatible drivers/servers.
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions
> > + * are met:
> > + * 1. Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * 2. Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in the
> > + * documentation and/or other materials provided with the distribution.
> > + * 3. Neither the name of IBM nor the names of its contributors
> > + * may be used to endorse or promote products derived from this software
> > + * without specific prior written permission.
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> > + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL IBM OR
> > + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> > + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
> > + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
> > + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> > + * SUCH DAMAGE. */
> > +#include <linux/virtio_ids.h>
> > +#include <linux/virtio_config.h>
> > +
> > +enum virtio_input_config_select {
> > + VIRTIO_INPUT_CFG_UNSET = 0x00,
> > + VIRTIO_INPUT_CFG_ID_NAME = 0x01,
> > + VIRTIO_INPUT_CFG_ID_SERIAL = 0x02,
> > + VIRTIO_INPUT_CFG_ID_DEVIDS = 0x03,
> > + VIRTIO_INPUT_CFG_PROP_BITS = 0x10,
> > + VIRTIO_INPUT_CFG_EV_BITS = 0x11,
> > + VIRTIO_INPUT_CFG_ABS_INFO = 0x12,
> > +};
> > +
> > +struct virtio_input_absinfo {
> > + __virtio32 min;
> > + __virtio32 max;
> > + __virtio32 fuzz;
> > + __virtio32 flat;
> > + __virtio32 res;
> > +};
> > +
> > +struct virtio_input_devids {
> > + __virtio16 bustype;
> > + __virtio16 vendor;
> > + __virtio16 product;
> > + __virtio16 version;
> > +};
> > +
>
> this padding bt two spaces looks weird.
>
> > +struct virtio_input_config {
> > + __u8 select;
> > + __u8 subsel;
> > + __u8 size;
> > + __u8 reserved;
> > + union {
> > + char string[128];
> > + __u8 bitmap[128];
>
> I note that neither string nor bitmap are used by
> driver. What are they in aid of?

Also, what happens if we need more than 1024 bits to pass bitmap data?
We might get there with keyboards.

>
> > + struct virtio_input_absinfo abs;
> > + struct virtio_input_devids ids;
> > + } u;
> > +};
> > +
> > +struct virtio_input_event {
> > + __le16 type;
> > + __le16 code;
> > + __le32 value;
> > +};
> > +
> > +#endif /* _LINUX_VIRTIO_INPUT_H */
> > --
> > 1.8.3.1

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2015-03-24 17:41    [W:0.447 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site