lkml.org 
[lkml]   [2015]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] ARM: dts: OMAP5+: separate the cpu thermal zone definition from omap4
On 03/20/2015 11:54 PM, Eduardo Valentin wrote:
> On Fri, Mar 20, 2015 at 02:47:39PM -0500, Nishanth Menon wrote:
>> From: Tero Kristo <t-kristo@ti.com>
>>
>> OMAP4 has a finer counter granularity, which allows for a delay of 1000ms
>> in the thermal zone polling intervals. OMAP5/DRA7 have different counter
>> mechanism, which allows at maximum a 500ms timer. Adjust the cpu thermal
>> zone accordingly for OMAP5/DRA7.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> Signed-off-by: Nishanth Menon <nm@ti.com>
>
>
>> ---
>> arch/arm/boot/dts/omap5-cpu-thermal.dtsi | 41 ++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/omap5.dtsi | 2 +-
>> 2 files changed, 42 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm/boot/dts/omap5-cpu-thermal.dtsi
>>
>> diff --git a/arch/arm/boot/dts/omap5-cpu-thermal.dtsi b/arch/arm/boot/dts/omap5-cpu-thermal.dtsi
>> new file mode 100644
>> index 000000000000..4a6427c1e47e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap5-cpu-thermal.dtsi
>> @@ -0,0 +1,41 @@
>> +/*
>> + * Device Tree Source for OMAP4/5 SoC CPU thermal
>> + *
>> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
>> + * Contact: Tero Kristo <t-kristo@ti.com>
>> + *
>> + * This file is licensed under the terms of the GNU General Public License
>> + * version 2. This program is licensed "as is" without any warranty of any
>> + * kind, whether express or implied.
>> + */
>> +
>> +#include <dt-bindings/thermal/thermal.h>
>> +
>> +cpu_thermal: cpu_thermal {
>> + polling-delay-passive = <250>; /* milliseconds */
>> + polling-delay = <500>; /* milliseconds */
>> +
>> + /* sensor ID */
>> + thermal-sensors = <&bandgap 0>;
>> +
>> + cpu_trips: trips {
>> + cpu_alert0: cpu_alert {
>> + temperature = <100000>; /* millicelsius */
>> + hysteresis = <2000>; /* millicelsius */
>> + type = "passive";
>> + };
>> + cpu_crit: cpu_crit {
>> + temperature = <125000>; /* millicelsius */
>> + hysteresis = <2000>; /* millicelsius */
>> + type = "critical";
>> + };
>> + };
>> +
>> + cpu_cooling_maps: cooling-maps {
>> + map0 {
>> + trip = <&cpu_alert0>;
>> + cooling-device =
>> + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> +};
>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>> index ddff674bd05e..e650d4eb59dd 100644
>> --- a/arch/arm/boot/dts/omap5.dtsi
>> +++ b/arch/arm/boot/dts/omap5.dtsi
>> @@ -67,7 +67,7 @@
>> };
>>
>> thermal-zones {
>> - #include "omap4-cpu-thermal.dtsi"
>> + #include "omap5-cpu-thermal.dtsi"
>
> Can't we simple change the polling value for the omap5 case and reuse
> the omap4 file?

Hmm yea, I posted a patch like this before for o5 and it was queued
already. See:

http://thread.gmane.org/gmane.linux.ports.arm.omap/123729

The dra7 part was missing from this set though, so patches 2/3 do not
directly work with that one and will require some changes similar to the
linked omap4 one.

-Tero

>
>> #include "omap5-gpu-thermal.dtsi"
>> #include "omap5-core-thermal.dtsi"
>> };
>> --
>> 1.7.9.5
>>



\
 
 \ /
  Last update: 2015-03-23 11:21    [W:0.048 / U:2.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site