lkml.org 
[lkml]   [2015]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/3] tty slave device support - version 3.
Hi!

> here is version 3 of support for tty-slaves.
>
> This version introduces a new bus-type for tty-slaves, and causes
> a tty-slave device to appear in /sys/devices between the uart and the
> tty.
> It effectively intercepts and calls from the tty to the uart (i.e. any
> tty_operations) and applies extra functionality at that point.
>
> Currently the only driver intercepts open and close.
> It powers on the device on open, and powers off at last-close.
>
> Power can be controlled by a regulator or by toggling a GPIO.
>
> I think I've incorporated most of the feed back I received from
> previous versions, but if I missed something - I apologize. If
> this approach is structurally acceptable then I can fix up all the
> smaller issues.

Do you have dts example? Anyway, we'll need something similar for
bluetooth on N900. But we'd like the /dev/ttyXX not to be visible to
the userspace in that case.

Thanks,
Pavel

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2015-03-20 20:41    [W:0.406 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site