lkml.org 
[lkml]   [2015]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2 3/3] Documentation: DT bindings: Tegra AHB: note base address change
On Thu, 19 Mar 2015, Stephen Warren wrote:

> We should not document Linux 4.1 as the cut-off. DT bindings are supposed to
> be OS agnostic. While it's practically unlikely, it is entirely possible for
> some other OS to have already implemented support for this binding, and the
> current binding is an ABI. We have no control over if/when any non-Linux code
> is updated to add support for a 0-based offset for existing SoCs, and
> certainly no versions of Linux or any other OS can be updated retro-actively
> except perhaps a few linux-stable versions. We can however write the binding
> in such a way as support for new SoCs requires the new 0-based address, since
> there is no binding specification for those new chips yet, and the time when
> you add the new binding documentation is the first time any OS could possibly
> add conformant support for it.
>
> In summary, I believe the binding document must state that T20/30/114/124
> require the offset of 4 in reg value, and newer chips require no offset in the
> reg value. We can still always accept either in the Linux kernel going forward
> based on the principle of being lenient re: input data.

That's fine. I'll send a patch for that.


- Paul


\
 
 \ /
  Last update: 2015-03-19 20:21    [W:2.109 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site