lkml.org 
[lkml]   [2015]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] mmc: sdhci-msm: Add support for vendor capabilities registers
From
On Thu, Mar 19, 2015 at 9:21 AM, Georgi Djakov <georgi.djakov@linaro.org> wrote:
[..]
>> Does the 8916 board you have work without bumping the
>> regulator_set_load() (previously regulator_set_optimum_mode())? None
>> of my 8974 boards work reliably without it.
>
> My 8916 board seems to be working fine with this, at least when doing basic tests
> like mounting filesystems and file transfers. I'm not calling any regulator_set_load()
> functions. Is your board a dragonboard or something else? If you are doing any
> specific tests maybe i can try the same on my board?
>

My test setup is Xperia Z1, where I get issues when running with
hs200. On Xperia Z3 i can't even read out the partition table during
boot. I'm not sure what causes the difference to the dragonboard -
perhaps just different memories.

So I have a patch where I hook up the mmc framework with some calls to
regulator_set_load(), but it need some more love before I can send it
out. I postponed it due to the rework of regulator_set_optimum_mode()
that I did.

Regards,
Bjorn


\
 
 \ /
  Last update: 2015-03-19 19:21    [W:0.065 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site