lkml.org 
[lkml]   [2015]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH - v7] of: Move of_dma_configure() to device.c to help re-use
On Tue, Mar 03, 2015 at 05:54:25PM -0500, Murali Karicheri wrote:
> On 03/03/2015 03:53 PM, Bjorn Helgaas wrote:
> >[+cc linux-pci]
> >
> >On Tue, Mar 3, 2015 at 11:55 AM, Murali Karicheri<m-karicheri2@ti.com> wrote:
> >>On 03/02/2015 10:43 PM, Bjorn Helgaas wrote:
> >>>
> >>>On Mon, Mar 2, 2015 at 3:59 PM, Murali Karicheri<m-karicheri2@ti.com>
> >>>wrote:
> >>>>
> >>>>Move of_dma_configure() to device.c so it can be re-used for PCI devices
> >>>>to
> >>>>obtain DMA configuration from DT. Also add a second argument so that for
> >>>>PCI, the DT node of root bus host bridge can be used to obtain the DMA
> >>>>configuration for the slave PCI device.
> >>>>
> >>>>Tested-by: Suravee Suthikulpanit<Suravee.Suthikulpanit@amd.com> (AMD
> >>>>Seattle)
> >>>>Signed-off-by: Murali Karicheri<m-karicheri2@ti.com>
> >>>>Signed-off-by: Bjorn Helgaas<bhelgaas@google.com>
> >>>>Reviewed-by: Catalin Marinas<catalin.marinas@arm.com>
> >>>>Acked-by: Will Deacon<will.deacon@arm.com>
> >>>>CC: Joerg Roedel<joro@8bytes.org>
> >>>>CC: Grant Likely<grant.likely@linaro.org>
> >>>>CC: Rob Herring<robh+dt@kernel.org>
> >>>>CC: Russell King<linux@arm.linux.org.uk>
> >>>>CC: Arnd Bergmann<arnd@arndb.de>
> >>>>---
> >>>> - Based on the existing patch applied to arm-pci/pci/iommu for pci next
> >>>>(Bjorn)
> >>>> - Fixed the build issue reported on ARCH=x86_64
> >>>
> >>>
> >>>Hi Murali,
> >>>
> >>>Can you please repost the entire series with fixed patches? It's
> >>>easier for me to reapply the whole thing at once than it is to keep
> >>>track of and fiddle with individual patches.
> >>>
> >>>Bjorn
> >>
> >>Bjorn,
> >>
> >>Ok. I have just posted v8 of the series including all patches.
> >
> >Thanks, I put them on a pci/murali-v8 branch for now. I'm assuming
> >you want them to go through my tree. In the cover letter, you
> >mentioned the "arm-pci iommu branch", so if that means you want them
> >via an ARM tree instead of mine, just let me know. I assume the build
> >will be clean and I'll rename it back to pci/iommu.
>
> My bad. It should have beem pci/iommu. My remote was named arm-pci
> and hence the confusion. Please apply it to the pci/iommu branch.

Applied to pci/iommu for v4.1, thanks!

Bjorn


\
 
 \ /
  Last update: 2015-03-19 16:21    [W:2.277 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site