lkml.org 
[lkml]   [2015]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2 00/12] usb: ulpi bus
On Wed, Mar 18, 2015 at 10:12:13AM -0700, David Cohen wrote:
> Hi,
>
> On Wed, Mar 18, 2015 at 02:40:21PM +0200, Heikki Krogerus wrote:
> >
> > Major changes since v1:
> > - calling dwc3_phy_setup earlier and registering the ULPI interface there.
> > - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
> > suggested by Felipe
> > - dwc3 soft reset before registration of the ULPI interface to sync the clocks
> > as suggested by David
> > - Including support for the BYT boards that have the GPIOs controlling the reset
> > and cs signals.
> >
> >
> > Heikki Krogerus (12):
> > usb: add bus type for USB ULPI
> > usb: dwc3: USB2 PHY register access bits
> > usb: dwc3: ULPI or UTMI+ select
> > usb: dwc3: store driver data earlier
> > usb: dwc3: cache hwparams earlier
> > usb: dwc3: soft reset to it's own function
> > usb: dwc3: setup phys earlier
> > usb: dwc3: add hsphy_interface property
> > usb: dwc3: pci: add quirk for Baytrails
> > usb: dwc3: add ULPI interface support
> > phy: helpers for USB ULPI PHY registering
> > phy: add driver for TI TUSB1210 ULPI PHY
>
> Except for my comment on patch "9/12", this version looks fine on my
> side.

Making things official. For the whole series (except 9/12):
Acked-by: David Cohen <david.a.cohen@linux.intel.com>


\
 
 \ /
  Last update: 2015-03-18 18:21    [W:0.137 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site