lkml.org 
[lkml]   [2015]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2 00/12] usb: ulpi bus
Hi,

On Wed, Mar 18, 2015 at 02:40:21PM +0200, Heikki Krogerus wrote:
>
> Major changes since v1:
> - calling dwc3_phy_setup earlier and registering the ULPI interface there.
> - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
> suggested by Felipe
> - dwc3 soft reset before registration of the ULPI interface to sync the clocks
> as suggested by David
> - Including support for the BYT boards that have the GPIOs controlling the reset
> and cs signals.
>
>
> Heikki Krogerus (12):
> usb: add bus type for USB ULPI
> usb: dwc3: USB2 PHY register access bits
> usb: dwc3: ULPI or UTMI+ select
> usb: dwc3: store driver data earlier
> usb: dwc3: cache hwparams earlier
> usb: dwc3: soft reset to it's own function
> usb: dwc3: setup phys earlier
> usb: dwc3: add hsphy_interface property
> usb: dwc3: pci: add quirk for Baytrails
> usb: dwc3: add ULPI interface support
> phy: helpers for USB ULPI PHY registering
> phy: add driver for TI TUSB1210 ULPI PHY

Except for my comment on patch "9/12", this version looks fine on my
side.

BR, David


\
 
 \ /
  Last update: 2015-03-18 18:21    [W:0.422 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site