lkml.org 
[lkml]   [2015]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [STLinux Kernel] [PATCH 6/6] pinctrl: st: Display pin's function when printing pinctrl debug information
On Wed, 18 Mar 2015, Maxime Coquelin wrote:

> Hi Lee,
>
> On 03/18/2015 11:51 AM, Lee Jones wrote:
> >Great for easily determining which mode a pin is operating in.
> >This patch was particularly helpful when debugging a recent GPIO/
> >Pinctrl disparity issue.
> >
> >Before:
> > $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins
> > pin 33 (PIO4[1]):[OE:0,PU:0,OD:0]
> > [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0]
> >
> >After [GPIO]:
> > $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins
> > pin 33 (PIO4[1]):[OE:0,PU:0,OD:0] GPIO
> > [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0]
> >
> >After [Alt]:
> > $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins
> > pin 33 (PIO4[1]):[OE:0,PU:0,OD:0] Alt Fn 2
> > [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0]
> >
> >Signed-off-by: Lee Jones <lee.jones@linaro.org>
> >---
> > drivers/pinctrl/pinctrl-st.c | 12 +++++++++++-
> > 1 file changed, 11 insertions(+), 1 deletion(-)
> A couple of comments below.
> Once fixed, you can add my:
> Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
>
>
>
> >
> >diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
> >index 1cda40e..d5b2ffa 100644
> >--- a/drivers/pinctrl/pinctrl-st.c
> >+++ b/drivers/pinctrl/pinctrl-st.c
> >@@ -1058,18 +1058,28 @@ static void st_pinconf_dbg_show(struct pinctrl_dev *pctldev,
> > {
> > struct st_pio_control *pc;
> > unsigned long config;
> >+ unsigned int function;
> > int offset = st_gpio_pin(pin_id);
> >+ char f[64];
> 64 bytes is way too big here

Ah yes, this is legacy from when the message was much larger.

Initially, it was "WARN: Pin in GPIO mode -- this status is invalid"

But this incarnation is much nicer I thought.

Good spot. Will fix.

> > mutex_unlock(&pctldev->mutex);
> > pc = st_get_pio_control(pctldev, pin_id);
> > st_pinconf_get(pctldev, pin_id, &config);
> > mutex_lock(&pctldev->mutex);
> >- seq_printf(s, "[OE:%ld,PU:%ld,OD:%ld]\n"
> >+
> >+ function = st_pctl_get_pin_function(pc, offset);
> >+ if (function)
> >+ sprintf(f, "Alt Fn %d", function);
> Please use snprintf.

Of course. Will fix.

> >+ else
> >+ sprintf(f, "GPIO");
> >+
> >+ seq_printf(s, "[OE:%d,PU:%ld,OD:%ld]\t%s\n"
> > "\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
> > "de:%ld,rt-clk:%ld,rt-delay:%ld]",
> > !st_gpio_get_direction(&pc_to_bank(pc)->gpio_chip, offset),
> > ST_PINCONF_UNPACK_PU(config),
> > ST_PINCONF_UNPACK_OD(config),
> >+ f,
> > ST_PINCONF_UNPACK_RT(config),
> > ST_PINCONF_UNPACK_RT_INVERTCLK(config),
> > ST_PINCONF_UNPACK_RT_CLKNOTDATA(config),
>
> Thanks,
> Maxime

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-03-18 18:01    [W:0.096 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site