lkml.org 
[lkml]   [2015]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 09/12] usb: dwc3: pci: add quirk for Baytrails
Date
On some BYT platforms the USB2 PHY needs to be put into
operational mode by the controller driver with GPIOs
controlling the PHYs reset and cs signals.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
drivers/usb/dwc3/dwc3-pci.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index b773fb5..01cfdbd 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -21,6 +21,8 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>

#include "platform_data.h"

@@ -31,6 +33,15 @@
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130

+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
+ { "reset-gpios", &reset_gpios, 1 },
+ { "cs-gpios", &cs_gpios, 1 },
+ { },
+};
+
static int dwc3_pci_quirks(struct pci_dev *pdev)
{
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
@@ -65,6 +76,31 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
sizeof(pdata));
}

+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
+ struct gpio_desc *gpio;
+
+ acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+ acpi_dwc3_byt_gpios);
+
+ gpio = gpiod_get(&pdev->dev, "reset");
+ if (IS_ERR(gpio))
+ return 0;
+
+ /* These GPIOs will turn on the USB2 PHY */
+ gpiod_direction_output(gpio, 0);
+ gpiod_set_value_cansleep(gpio, 1);
+ gpiod_put(gpio);
+
+ gpio = gpiod_get(&pdev->dev, "cs");
+ if (!IS_ERR(gpio)) {
+ gpiod_direction_output(gpio, 0);
+ gpiod_set_value_cansleep(gpio, 1);
+ gpiod_put(gpio);
+ }
+ msleep(10);
+ }
+
return 0;
}

--
2.1.4


\
 
 \ /
  Last update: 2015-03-18 14:01    [W:0.187 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site