lkml.org 
[lkml]   [2015]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/4] arm64: dts: Add Qualcomm MSM8916 SoC and evaluation board dts
On 03/13/2015 06:06 PM, Kumar Gala wrote:
> Add initial device tree support for Qualcomm MSM8916 SoC and MTP8916
> evaluation board. At the current time we only boot up a single processor.
>
> Signed-off-by: Kumar Gala <galak@codeaurora.org>
> ---
> v5:
> * killed use of skeleton, moved to addr/size cells both being 2
> * Added serial alias in prep of being able to spec uart params
> in chosen node
>
> v4:
> * Added chosen node so we dont need to spec everything for earlycon
> * fixed up timer node to armv8, dropped clock-frequency
>
> v3:
> * Removed qcom,msm-id and qcom,board-id
> * Added top level compat for "qcom,msm8916-mtp-smb1360"
>
> v2:
> * Updated to dropping CONFIG_ARCH_QCOM_MSM8916
> * Updated to use qcom-ids.h
>
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/qcom/Makefile | 5 +
> arch/arm64/boot/dts/qcom/msm8916-mtp.dts | 21 ++++
> arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi | 32 +++++
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 195 ++++++++++++++++++++++++++++++
> 5 files changed, 254 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/Makefile
> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dts
> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/msm8916.dtsi
>
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index e0350ca..8517f15 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -5,5 +5,6 @@ dts-dirs += cavium
> dts-dirs += exynos
> dts-dirs += freescale
> dts-dirs += mediatek
> +dts-dirs += qcom
>
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> new file mode 100644
> index 0000000..360ec4c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -0,0 +1,5 @@
> +dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
> +
> +always := $(dtb-y)
> +subdir-y := $(dts-dirs)
> +clean-files := *.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
> new file mode 100644
> index 0000000..784ad92
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
> @@ -0,0 +1,21 @@
> +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.

multi line comment rules

> +*
> +* This program is free software; you can redistribute it and/or modify
> +* it under the terms of the GNU General Public License version 2 and
> +* only version 2 as published by the Free Software Foundation.
> +*
> +* This program is distributed in the hope that it will be useful,
> +* but WITHOUT ANY WARRANTY; without even the implied warranty of
> +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +* GNU General Public License for more details.
> +*/
> +
> +/dts-v1/;
> +
> +#include "msm8916-mtp.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
> + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360",
> + "qcom,msm8916", "qcom,mtp";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
> new file mode 100644
> index 0000000..8dbb77f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
> @@ -0,0 +1,32 @@
> +/* Copyright (c) 2014-2014, The Linux Foundation. All rights reserved.

multi line comment rules and 2014-2015

> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "msm8916.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &blsp1_uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +
> + soc {
> + serial@78b0000 {
> + status = "okay";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&blsp1_uart2_default>;
> + pinctrl-1 = <&blsp1_uart2_sleep>;
> + };
> + };

Why don't describe this as:

&blsp1_uart2 {
status = "okay";
pinctrl-names = xxxx;
....
};

it looks more readable and obvious. This is what the other boards doing
as well.

<snip>

--
regards,
Stan


\
 
 \ /
  Last update: 2015-03-17 10:41    [W:0.044 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site