lkml.org 
[lkml]   [2015]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/5] PCI: st: provide support for dw pcie
Date
Changes in v2:
- comestic corrections in device tree binding
- add pci-st.c into MAINTAINERS
- remove st_pcie_ops structure to avoid another level of indirection
- remove nasty busy-loop
- remove useless test using virt_to_phys()
- move disable io support into dw-pcie driver

I don't change the st_pcie_abort_handler() function because abort handling
is masked during boot.


This patch-set introduces a STMicroelectronics PCIe controller.
It's based on designware PCIe driver.

Gabriel Fernandez (5):
ARM: STi: Kconfig update for PCIe support
PCI: st: Add Device Tree bindings for sti pcie
PCI: st: Provide support for the sti PCIe controller
PCI: designware: Add disable IO support
MAINTAINERS: Add pci-st.c to ARCH/STI architecture

.../devicetree/bindings/pci/designware-pcie.txt | 2 +
Documentation/devicetree/bindings/pci/st-pcie.txt | 54 ++
MAINTAINERS | 1 +
arch/arm/mach-sti/Kconfig | 2 +
drivers/pci/host/Kconfig | 9 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-st.c | 617 +++++++++++++++++++++
drivers/pci/host/pcie-designware.c | 24 +-
drivers/pci/host/pcie-designware.h | 1 +
9 files changed, 709 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/st-pcie.txt
create mode 100644 drivers/pci/host/pci-st.c

--
1.9.1



\
 
 \ /
  Last update: 2015-03-16 16:01    [W:0.274 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site