lkml.org 
[lkml]   [2015]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.19 078/177] Revert "USB: serial: make bulk_out_size a lower limit"
Date
3.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit bc4b1f486fe69b86769e07c8edce472327a8462b upstream.

This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2.

A bulk-out size smaller than the end-point size is indeed valid. The
offending commit broke the usb-debug driver for EHCI debug devices,
which use 8-byte buffers.

Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit")
Reported-by: "Li, Elvin" <elvin.li@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/serial/usb-serial.c | 5 +++--
include/linux/usb/serial.h | 3 +--
2 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -940,8 +940,9 @@ static int usb_serial_probe(struct usb_i
port = serial->port[i];
if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
goto probe_error;
- buffer_size = max_t(int, serial->type->bulk_out_size,
- usb_endpoint_maxp(endpoint));
+ buffer_size = serial->type->bulk_out_size;
+ if (!buffer_size)
+ buffer_size = usb_endpoint_maxp(endpoint);
port->bulk_out_size = buffer_size;
port->bulk_out_endpointAddress = endpoint->bEndpointAddress;

--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -190,8 +190,7 @@ static inline void usb_set_serial_data(s
* @num_ports: the number of different ports this device will have.
* @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
* (0 = end-point size)
- * @bulk_out_size: minimum number of bytes to allocate for bulk-out buffer
- * (0 = end-point size)
+ * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
* @calc_num_ports: pointer to a function to determine how many ports this
* device has dynamically. It will be called after the probe()
* callback is called, but before attach()



\
 
 \ /
  Last update: 2015-03-16 15:21    [W:0.341 / U:2.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site