Messages in this thread | | | From | Chen-Yu Tsai <> | Subject | [PATCH v5 0/2] ARM: sun9i: Add USB host controller support for A80 | Date | Sat, 14 Mar 2015 11:57:15 +0800 |
| |
Hi everyone,
This is v5 of my A80 USB support series. v5 addresses some comments on the phy driver, and adds a patch switching the dts from phy driver regulator bindings to phy core bindings.
Changes since v4:
- Fixed copyright date
- Dropped unused header files
- Dropped regulator code in the phy driver in favor of phy core power sequencing code
- Dropped unneeded dev_set_drvdata()
- Fixed MODULE_LICENSE to say GPL, matching header
- Dropped unneeded "select USB_PHY" in Kconfig
- Mention optional "phy-supply" property in bindings
- Added "ARM: dts: sun9i: optimus: Switch to phy core regulator bindings for usb phys"
Regards ChenYu
Chen-Yu Tsai (2): phy: Add driver to support individual USB PHYs on sun9i ARM: dts: sun9i: optimus: Switch to phy core regulator bindings for usb phys
.../devicetree/bindings/phy/sun9i-usb-phy.txt | 38 ++++ arch/arm/boot/dts/sun9i-a80-optimus.dts | 4 +- drivers/phy/Kconfig | 11 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-sun9i-usb.c | 202 +++++++++++++++++++++ 5 files changed, 254 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt create mode 100644 drivers/phy/phy-sun9i-usb.c
-- 2.1.4
| |