lkml.org 
[lkml]   [2015]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 3/5] MIPS: Document Pistachio boot protocol and device-tree bindings
Date
The Pistachio SoC boots only with device-tree.  Document the required
properties and nodes as well as the boot protocol between the bootlaoder
and the kernel.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
---
Changes from v1:
- switched to MIPS UHI hand-off protocol
---
.../devicetree/bindings/mips/img/pistachio.txt | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/img/pistachio.txt

diff --git a/Documentation/devicetree/bindings/mips/img/pistachio.txt b/Documentation/devicetree/bindings/mips/img/pistachio.txt
new file mode 100644
index 0000000..a736d88
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/img/pistachio.txt
@@ -0,0 +1,42 @@
+Imagination Pistachio SoC
+=========================
+
+Required properties:
+--------------------
+ - compatible: Must include "img,pistachio".
+
+CPU nodes:
+----------
+A "cpus" node is required. Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required for at least CPU 0. Since the topology may
+be probed via CPS, it is not necessary to specify secondary CPUs. Required
+propertis:
+ - device_type: Must be "cpu".
+ - compatible: Must be "mti,interaptiv".
+ - reg: CPU number.
+ - clocks: Must include the CPU clock. See ../../clock/clock-bindings.txt for
+ details on clock bindings.
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,interaptiv";
+ reg = <0>;
+ clocks = <&clk_core CLK_MIPS>;
+ };
+ };
+
+
+Boot protocol:
+--------------
+In accordance with the MIPS UHI specification[1], the bootloader must pass the
+following arguments to the kernel:
+ - $a0: -2.
+ - $a1: KSEG0 address of the flattened device-tree blob.
+
+[1] http://prplfoundation.org/wiki/MIPS_documentation
--
2.2.0.rc0.207.ga3a616c


\
 
 \ /
  Last update: 2015-03-14 00:01    [W:0.057 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site