lkml.org 
[lkml]   [2015]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 09/10] clocksource: atmel-st: remove mach/hardware dependency
Date
Remove the mach/hardware dependency to prepare the driver for multiplatform
support.
Also switch from setup_irq() to request_irq()

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/timer-atmel-st.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
index 674ef2519d6b..1692e17e096b 100644
--- a/drivers/clocksource/timer-atmel-st.c
+++ b/drivers/clocksource/timer-atmel-st.c
@@ -29,15 +29,12 @@
#include <linux/of_irq.h>
#include <linux/regmap.h>

-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-
static unsigned long last_crtr;
static u32 irqmask;
static struct clock_event_device clkevt;
static struct regmap *regmap_st;

+#define AT91_SLOW_CLOCK 32768
#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ)

/*
@@ -96,13 +93,6 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
return IRQ_NONE;
}

-static struct irqaction at91rm9200_timer_irq = {
- .name = "at91_tick",
- .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = at91rm9200_timer_interrupt,
- .irq = NR_IRQS_LEGACY + AT91_ID_SYS,
-};
-
static cycle_t read_clk32k(struct clocksource *cs)
{
return read_CRTR();
@@ -193,6 +183,7 @@ static struct clock_event_device clkevt = {
static void __init atmel_st_timer_init(struct device_node *node)
{
unsigned int val;
+ int irq, ret;

regmap_st = syscon_node_to_regmap(node);
if (IS_ERR(regmap_st))
@@ -204,12 +195,16 @@ static void __init atmel_st_timer_init(struct device_node *node)
regmap_read(regmap_st, AT91_ST_SR, &val);

/* Get the interrupts property */
- at91rm9200_timer_irq.irq = irq_of_parse_and_map(node, 0);
- if (!at91rm9200_timer_irq.irq)
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq)
panic(pr_fmt("Unable to get IRQ from DT\n"));

/* Make IRQs happen for the system timer */
- setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
+ ret = request_irq(irq, at91rm9200_timer_interrupt,
+ IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
+ "at91_tick", regmap_st);
+ if (ret)
+ panic(pr_fmt("Unable to setup IRQ\n"));

/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
--
2.1.0


\
 
 \ /
  Last update: 2015-03-13 12:01    [W:0.128 / U:1.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site