lkml.org 
[lkml]   [2015]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 09/10] clocksource: atmel-st: remove mach/hardware dependency
On 03/12/2015 01:07 PM, Alexandre Belloni wrote:
> Remove the mach/hardware dependency to prepare the driver for multiplatform
> support.
> Also switch from setup_irq() to request_irq()
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> drivers/clocksource/timer-atmel-st.c | 21 +++++++++------------
> 1 file changed, 9 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
> index 674ef2519d6b..91d6cbb7a56b 100644
> --- a/drivers/clocksource/timer-atmel-st.c
> +++ b/drivers/clocksource/timer-atmel-st.c
> @@ -31,13 +31,12 @@
>
> #include <asm/mach/time.h>

Couldn't the header above be removed ?

Other than that:

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> -#include <mach/hardware.h>
> -
> static unsigned long last_crtr;
> static u32 irqmask;
> static struct clock_event_device clkevt;
> static struct regmap *regmap_st;
>
> +#define AT91_SLOW_CLOCK 32768
> #define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ)
>
> /*
> @@ -96,13 +95,6 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
> return IRQ_NONE;
> }
>
> -static struct irqaction at91rm9200_timer_irq = {
> - .name = "at91_tick",
> - .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
> - .handler = at91rm9200_timer_interrupt,
> - .irq = NR_IRQS_LEGACY + AT91_ID_SYS,
> -};
> -
> static cycle_t read_clk32k(struct clocksource *cs)
> {
> return read_CRTR();
> @@ -193,6 +185,7 @@ static struct clock_event_device clkevt = {
> static void __init atmel_st_timer_init(struct device_node *node)
> {
> unsigned int val;
> + int irq, ret;
>
> regmap_st = syscon_node_to_regmap(node);
> if (IS_ERR(regmap_st))
> @@ -204,12 +197,16 @@ static void __init atmel_st_timer_init(struct device_node *node)
> regmap_read(regmap_st, AT91_ST_SR, &val);
>
> /* Get the interrupts property */
> - at91rm9200_timer_irq.irq = irq_of_parse_and_map(node, 0);
> - if (!at91rm9200_timer_irq.irq)
> + irq = irq_of_parse_and_map(node, 0);
> + if (!irq)
> panic(pr_fmt("Unable to get IRQ from DT\n"));
>
> /* Make IRQs happen for the system timer */
> - setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
> + ret = request_irq(irq, at91rm9200_timer_interrupt,
> + IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
> + "at91_tick", regmap_st);
> + if (ret)
> + panic(pr_fmt("Unable to setup IRQ\n"));
>
> /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
> * directly for the clocksource and all clockevents, after adjusting
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog



\
 
 \ /
  Last update: 2015-03-13 11:41    [W:0.097 / U:9.408 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site