lkml.org 
[lkml]   [2015]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4] SATA: OCTEON: support SATA on OCTEON platform
Date
On Tuesday 10 March 2015 16:26:26 Aleksey Makarov wrote:
> The OCTEON SATA controller is currently found on cn71XX devices.
>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: David Daney <david.daney@cavium.com>
> Signed-off-by: Vinita Gupta <vgupta@caviumnetworks.com>
> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
> ---
> .../devicetree/bindings/ata/ahci-platform.txt | 1 +
> .../devicetree/bindings/mips/cavium/sata-uctl.txt | 28 ++++
> drivers/ata/Kconfig | 9 ++
> drivers/ata/Makefile | 1 +
> drivers/ata/ahci_platform.c | 1 +
> drivers/ata/sata_octeon.c | 153 +++++++++++++++++++++
> 6 files changed, 193 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
> create mode 100644 drivers/ata/sata_octeon.c
>
> Version 3:
> https://lkml.kernel.org/g/<1425567540-31572-1-git-send-email-aleksey.makarov@auriga.com>
>
> Changes in v4:
> - The call to dma_coerce_mask_and_coherent() was removed as suggested by Arnd Bergmann
> dma_mask and coherent_dma_mask are actually set in the ahci_platform_init_host()
> (libahci_platform.c)

Actually I see now that this is a driver for a bus, not a device, so
you also need to put the dma-ranges property into this device and
its parent, otherwise the dma_set_mask in ahci_platform_init_host
will fail (at least once MIPS is fixed and starts honoring the
dma-ranges).

> diff --git a/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt b/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
> new file mode 100644
> index 0000000..59e86a7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
> @@ -0,0 +1,28 @@
> +* UCTL SATA controller glue
> +
> +Properties:
> +- compatible: "cavium,octeon-7130-sata-uctl"
> +
> + Compatibility with the cn7130 SOC.
> +
> +- reg: The base address of the UCTL register bank.
> +
> +- #address-cells, #size-cells, and ranges must be present and hold
> + suitable values to map all child nodes.
> +
> +Example:
> +
> + uctl@118006c000000 {
> + compatible = "cavium,octeon-7130-sata-uctl";
> + reg = <0x11800 0x6c000000 0x0 0x100>;
> + ranges; /* Direct mapping */
> + #address-cells = <2>;
> + #size-cells = <2>;

What is an uctl? Is that a standard bus device name?

This is also where you should set the dma-ranges for the bus.

> +
> +/**
> + * cvmx_sata_uctl_shim_cfg
> + * from cvmx-sata-defs.h
> + *
> + * Accessible by: only when A_CLKDIV_EN
> + * Reset by: IOI reset (srst_n) or SATA_UCTL_CTL[SATA_UCTL_RST]
> + * This register allows configuration of various shim (UCTL) features.
> + * Fields XS_NCB_OOB_* are captured when there are no outstanding OOB errors
> + * indicated in INTSTAT and a new OOB error arrives.
> + * Fields XS_BAD_DMA_* are captured when there are no outstanding DMA errors
> + * indicated in INTSTAT and a new DMA error arrives.
> + */
> +union cvmx_sata_uctl_shim_cfg {
> + uint64_t u64;
> + struct cvmx_sata_uctl_shim_cfg_s {
> + /*
> + * Read/write error log for out-of-bound UAHC register access.
> + * 0 = read, 1 = write.
> + */
> + __BITFIELD_FIELD(uint64_t xs_ncb_oob_wrn : 1,
> + __BITFIELD_FIELD(uint64_t reserved_57_62 : 6,
> + /*
> + * SRCID error log for out-of-bound UAHC register access.
> + * The IOI outbound SRCID for the OOB error.
> + */
> + __BITFIELD_FIELD(uint64_t xs_ncb_oob_osrc : 9,
> + /*
> + * Read/write error log for bad DMA access from UAHC.
> + * 0 = read error log, 1 = write error log.
> + */
> + __BITFIELD_FIELD(uint64_t xm_bad_dma_wrn : 1,
> + __BITFIELD_FIELD(uint64_t reserved_44_46 : 3,
> + /*
> + * ErrType error log for bad DMA access from UAHC. Encodes the type of
> + * error encountered (error largest encoded value has priority).
> + * See SATA_UCTL_XM_BAD_DMA_TYPE_E.
> + */
> + __BITFIELD_FIELD(uint64_t xm_bad_dma_type : 4,
> + __BITFIELD_FIELD(uint64_t reserved_13_39 : 27,
> + /*
> + * Selects the IOI read command used by DMA accesses.
> + * See SATA_UCTL_DMA_READ_CMD_E.
> + */
> + __BITFIELD_FIELD(uint64_t dma_read_cmd : 1,
> + __BITFIELD_FIELD(uint64_t reserved_10_11 : 2,
> + /*
> + * Selects the endian format for DMA accesses to the L2C.
> + * See SATA_UCTL_ENDIAN_MODE_E.
> + */
> + __BITFIELD_FIELD(uint64_t dma_endian_mode : 2,
> + __BITFIELD_FIELD(uint64_t reserved_2_7 : 6,
> + /*
> + * Selects the endian format for IOI CSR accesses to the UAHC.
> + * Note that when UAHC CSRs are accessed via RSL, they are returned
> + * as big-endian. See SATA_UCTL_ENDIAN_MODE_E.
> + */
> + __BITFIELD_FIELD(uint64_t csr_endian_mode : 2,
> + ;))))))))))))
> + } s;
> +};

Try to avoid bit fields, as you can see here, it gets awfully ugly if you
want to get endianess right, better just use #defines for the bits within
the u64 word.


> +#define CVMX_SATA_UCTL_SHIM_CFG 0xE8
> +
> +static int ahci_octeon_probe(struct platform_device *pdev)
> +{
> + union cvmx_sata_uctl_shim_cfg shim_cfg;
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct resource *res;
> + void __iomem *base;
> + int ret;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "Platform resource[0] is missing\n");
> + return -ENODEV;
> + }
> +
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + /* set-up endian mode */
> + shim_cfg.u64 = cvmx_read_csr((uint64_t)base + CVMX_SATA_UCTL_SHIM_CFG);
> +#ifdef __BIG_ENDIAN
> + shim_cfg.s.dma_endian_mode = 1;
> + shim_cfg.s.csr_endian_mode = 1;
> +#else
> + shim_cfg.s.dma_endian_mode = 0;
> + shim_cfg.s.csr_endian_mode = 0;
> +#endif
> + shim_cfg.s.dma_read_cmd = 1; /* No allocate L2C */
> + cvmx_write_csr((uint64_t)base + CVMX_SATA_UCTL_SHIM_CFG, shim_cfg.u64);
> +
> + if (!node) {
> + dev_err(dev, "no device node, failed to add octeon sata\n");
> + return -ENODEV;
> + }
> +
> + ret = of_platform_populate(node, NULL, NULL, dev);
> + if (ret) {
> + dev_err(dev, "failed to add ahci-platform core\n");
> + return ret;
> + }
> +
> + return 0;
> +}

The current version doesn't really do anything, other than set a single
register. Are you planning to extend this a lot in the future?

If not, just make this a derived sata driver with an extra set of
soc-specific registers to set up.

Arnd


\
 
 \ /
  Last update: 2015-03-10 15:41    [W:0.082 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site