lkml.org 
[lkml]   [2015]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 3/7] x86, boot: Don't overlap VO with ZO data
Final patch:

---
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 7 Mar 2015 14:07:17 -0800
Subject: [PATCH] x86/setup: Don't overlap vmlinux's brk with compressed kernel's data

We already do move the compressed kernel close to the end of the buffer.
However, there's still overlapping beween kernel proper's .brk/.bss and
compressed kernel's data section.

Extend init_size so that kernel proper's .bss and .brk sections
do not overlap with compressed kernel's data section (see
arch/x86/boot/compressed/misc.c).

The increase is from _rodata to _end in the compressed kernel
(arch/x86/boot/compressed/vmlinux) which is something around ~90K on a
kernel with everything enabled in arch/x86/boot/ which gets linked into
vmlinux.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Link: http://lkml.kernel.org/r/1425766041-6551-4-git-send-email-yinghai@kernel.org
Fixes: f47233c2d34f ("x86/mm/ASLR: Propagate base load address calculation")
[ Rewrite commit message;
rename ADDON_ZO_SIZE to INIT_SIZE_PAD;
improve comments; measure size increase ]
Signed-off-by:
---
arch/x86/boot/Makefile | 2 +-
arch/x86/boot/compressed/vmlinux.lds.S | 1 +
arch/x86/boot/header.S | 13 +++++++++++--
3 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 57bbf2fb21f6..863ef25dcf60 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -86,7 +86,7 @@ targets += voffset.h
$(obj)/voffset.h: vmlinux FORCE
$(call if_changed,voffset)

-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_rodata\|z_.*\)$$/\#define ZO_\2 0x\1/p'

quiet_cmd_zoffset = ZOFFSET $@
cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index a80acabb80ec..45081235ce64 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -35,6 +35,7 @@ SECTIONS
*(.text.*)
_etext = . ;
}
+ . = ALIGN(PAGE_SIZE); /* keep INIT_SIZE_PAD in header.S page-aligned */
.rodata : {
_rodata = . ;
*(.rodata) /* read-only data */
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 9bfab22efdf7..db46aa45906d 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -440,13 +440,22 @@ setup_data: .quad 0 # 64-bit physical pointer to

pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr

+
#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_min_extract_offset)
+
+/*
+ * Additional padding so that compressed kernel's .data section doesn't overlap
+ * with kernel proper's .bss/.brk sections.
+ */
+#define INIT_SIZE_PAD (ZO__end - ZO__rodata)
#define VO_INIT_SIZE (VO__end - VO__text)
+
#if ZO_INIT_SIZE > VO_INIT_SIZE
-#define INIT_SIZE ZO_INIT_SIZE
+#define INIT_SIZE (ZO_INIT_SIZE + INIT_SIZE_PAD)
#else
-#define INIT_SIZE VO_INIT_SIZE
+#define INIT_SIZE (VO_INIT_SIZE + INIT_SIZE_PAD)
#endif
+
init_size: .long INIT_SIZE # kernel initialization size
handover_offset: .long 0 # Filled in by build.c

--
2.2.0.33.gc18b867
--
Regards/Gruss,
Boris.

ECO tip #101: Trim your mails when you reply.
--


\
 
 \ /
  Last update: 2015-03-10 10:41    [W:0.250 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site