lkml.org 
[lkml]   [2015]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH/RFC v10 15/19] media: Add registration helpers for V4L2 flash sub-devices
Hi Sakari,

Thanks for the review.

On 02/05/2015 06:59 PM, Sakari Ailus wrote:
> Hi Jacek,
>
> Thank you for your continuous efforts on this! I think this ended up being
> more complicated than I originally anticipated.
>
> On Fri, Jan 09, 2015 at 04:23:05PM +0100, Jacek Anaszewski wrote:
>> This patch adds helper functions for registering/unregistering
>> LED Flash class devices as V4L2 sub-devices. The functions should
>> be called from the LED subsystem device driver. In case the
>> support for V4L2 Flash sub-devices is disabled in the kernel
>> config the functions' empty versions will be used.
>>
>> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
>> Cc: Sakari Ailus <sakari.ailus@iki.fi>
>> Cc: Hans Verkuil <hans.verkuil@cisco.com>
>> ---
>> drivers/media/v4l2-core/Kconfig | 11 +
>> drivers/media/v4l2-core/Makefile | 2 +
>> drivers/media/v4l2-core/v4l2-flash.c | 581 ++++++++++++++++++++++++++++++++++
>> include/media/v4l2-flash.h | 139 ++++++++
>> 4 files changed, 733 insertions(+)
>> create mode 100644 drivers/media/v4l2-core/v4l2-flash.c
>> create mode 100644 include/media/v4l2-flash.h
>>
>> diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
>> index ba7e21a..f034f1a 100644
>> --- a/drivers/media/v4l2-core/Kconfig
>> +++ b/drivers/media/v4l2-core/Kconfig
>> @@ -44,6 +44,17 @@ config V4L2_MEM2MEM_DEV
>> tristate
>> depends on VIDEOBUF2_CORE
>>
>> +# Used by LED subsystem flash drivers
>> +config V4L2_FLASH_LED_CLASS
>> + tristate "Enable support for Flash sub-devices"
>> + depends on VIDEO_V4L2_SUBDEV_API
>> + depends on LEDS_CLASS_FLASH
>> + ---help---
>> + Say Y here to enable support for Flash sub-devices, which allow
>> + to control LED class devices with use of V4L2 Flash controls.
>> +
>> + When in doubt, say N.
>> +
>> # Used by drivers that need Videobuf modules
>> config VIDEOBUF_GEN
>> tristate
>> diff --git a/drivers/media/v4l2-core/Makefile b/drivers/media/v4l2-core/Makefile
>> index 63d29f2..44e858c 100644
>> --- a/drivers/media/v4l2-core/Makefile
>> +++ b/drivers/media/v4l2-core/Makefile
>> @@ -22,6 +22,8 @@ obj-$(CONFIG_VIDEO_TUNER) += tuner.o
>>
>> obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o
>>
>> +obj-$(CONFIG_V4L2_FLASH_LED_CLASS) += v4l2-flash.o
>> +
>> obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
>> obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
>> obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
>> diff --git a/drivers/media/v4l2-core/v4l2-flash.c b/drivers/media/v4l2-core/v4l2-flash.c
>> new file mode 100644
>> index 0000000..3fd6a08
>> --- /dev/null
>> +++ b/drivers/media/v4l2-core/v4l2-flash.c
>> @@ -0,0 +1,581 @@
>> +/*
>> + * V4L2 Flash LED sub-device registration helpers.
>> + *
>> + * Copyright (C) 2015 Samsung Electronics Co., Ltd
>> + * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation."
>> + */
>> +
>> +#include <linux/led-class-flash.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/slab.h>
>> +#include <linux/types.h>
>> +#include <media/v4l2-flash.h>
>> +
>> +#define has_flash_op(v4l2_flash, op) \
>> + (v4l2_flash && v4l2_flash->ops->op)
>> +
>> +#define call_flash_op(v4l2_flash, op, args...) \
>> + (has_flash_op(v4l2_flash, op) ? \
>> + v4l2_flash->ops->op(args) : \
>
> Wouldn't you need __VA_ARGS__ here to deliver the variable argument to the
> callee? Do you need variable arguments for the current flash ops?

Indeed, it would allow to avoid the need for passing v4l2_flash
argument twice. Nonetheless, as currently we have only one op, the macro
can have fixed number of arguments.

>> + -EINVAL)
>> +
>> +static inline enum led_brightness v4l2_flash_intensity_to_led_brightness(
>
> I'd drop inline and let the compiler decide. Same below.

Yes, this is a residue from the previous versions when the function
had single line probably.

>> + struct v4l2_ctrl **ctrls,
>> + enum ctrl_init_data_id cdata_id,
>> + s32 intensity)
>> +{
>> + struct v4l2_ctrl *ctrl = ctrls[cdata_id];
>> + s64 __intensity = intensity - ctrl->minimum;
>> +
>> + do_div(__intensity, ctrl->step);
>> +
>> + /*
>> + * Indicator leds, unlike torch leds, are turned on/off basing on
>> + * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
>> + * Therefore it must be possible to set it to 0 level which in
>> + * the LED subsystem reflects LED_OFF state.
>> + */
>> + if (cdata_id != INDICATOR_INTENSITY)
>> + ++__intensity;
>> +
>> + return __intensity;
>> +}
>> +
>> +static inline s32 v4l2_flash_led_brightness_to_intensity(
>> + struct v4l2_ctrl **ctrls,
>> + enum ctrl_init_data_id cdata_id,
>
> Could you pass a pointer to struct v4l2_ctrl instead?

Good point.

>> + enum led_brightness brightness)
>> +{
>> + struct v4l2_ctrl *ctrl = ctrls[cdata_id];
>> +
>> + /*
>> + * Indicator leds, unlike torch leds, are turned on/off basing on
>> + * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
>> + * Do not decrement brightness read from the LED subsystem for
>> + * indicator led as it may equal 0. For torch leds this function
>> + * is called only when V4L2_FLASH_LED_MODE_TORCH is set and the
>> + * brightness read is guaranteed to be greater than 0. In the mode
>> + * V4L2_FLASH_LED_MODE_NONE the cached torch intensity value is used.
>> + */
>> + if (cdata_id != INDICATOR_INTENSITY)
>> + --brightness;
>> +
>> + return (brightness * ctrl->step) + ctrl->minimum;
>> +}
>> +
>> +static int v4l2_flash_g_volatile_ctrl(struct v4l2_ctrl *c)
>> +{
>> + struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
>> + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
>> + struct led_classdev *led_cdev = &fled_cdev->led_cdev;
>> + struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
>> + bool is_strobing;
>> + int ret;
>> +
>> + switch (c->id) {
>> + case V4L2_CID_FLASH_TORCH_INTENSITY:
>> + /*
>> + * Update torch brightness only if in TORCH_MODE.
>> + * In other modes torch led is turned off, which
>> + * would spuriously inform the user space that
>> + * V4L2_CID_FLASH_TORCH_INTENSITY control setting
>> + * has changed.
>> + */
>> + if (ctrls[LED_MODE]->val == V4L2_FLASH_LED_MODE_TORCH) {
>> + ret = led_update_brightness(led_cdev);
>> + if (ret < 0)
>> + return ret;
>> + c->val = v4l2_flash_led_brightness_to_intensity(
>> + ctrls, TORCH_INTENSITY,
>> + led_cdev->brightness);
>> + }
>> + return 0;
>> + case V4L2_CID_FLASH_INDICATOR_INTENSITY:
>> + ret = led_update_brightness(led_cdev);
>> + if (ret < 0)
>> + return ret;
>> + c->val = v4l2_flash_led_brightness_to_intensity(
>> + ctrls, INDICATOR_INTENSITY,
>> + led_cdev->brightness);
>> + return 0;
>> + case V4L2_CID_FLASH_INTENSITY:
>> + ret = led_update_flash_brightness(fled_cdev);
>> + if (ret < 0)
>> + return ret;
>> + /* no conversion is needed */
>> + c->val = fled_cdev->brightness.val;
>> + return 0;
>> + case V4L2_CID_FLASH_STROBE_STATUS:
>> + ret = led_get_flash_strobe(fled_cdev, &is_strobing);
>> + if (ret < 0)
>> + return ret;
>> + c->val = is_strobing;
>> + return 0;
>> + case V4L2_CID_FLASH_FAULT:
>> + /* led faults map directly to V4L2 flash faults */
>> + return led_get_flash_fault(fled_cdev, &c->val);
>> + case V4L2_CID_FLASH_SYNC_STROBE:
>> + c->val = fled_cdev->sync_led_id;
>> + return 0;
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c)
>> +{
>> + struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
>> + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
>> + struct led_classdev *led_cdev = &fled_cdev->led_cdev;
>> + struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
>> + enum led_brightness brightness;
>> + bool external_strobe;
>> + int ret = 0;
>> +
>> + switch (c->id) {
>> + case V4L2_CID_FLASH_LED_MODE:
>> + switch (c->val) {
>> + case V4L2_FLASH_LED_MODE_NONE:
>> + led_set_brightness(led_cdev, LED_OFF);
>> + return led_set_flash_strobe(fled_cdev, false);
>> + case V4L2_FLASH_LED_MODE_FLASH:
>> + /* Turn the torch LED off */
>> + led_set_brightness(led_cdev, LED_OFF);
>> + external_strobe = (ctrls[STROBE_SOURCE]->val ==
>> + V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
>> +
>> + if (has_flash_op(v4l2_flash, external_strobe_set))
>> + ret = call_flash_op(v4l2_flash,
>> + external_strobe_set, v4l2_flash,
>> + external_strobe);
>> + return ret;
>> + case V4L2_FLASH_LED_MODE_TORCH:
>> + /* Stop flash strobing */
>> + ret = led_set_flash_strobe(fled_cdev, false);
>> + if (ret < 0)
>> + return ret;
>> +
>> + brightness =
>> + v4l2_flash_intensity_to_led_brightness(
>> + ctrls, TORCH_INTENSITY,
>> + ctrls[TORCH_INTENSITY]->val);
>> + led_set_brightness(led_cdev, brightness);
>> + return 0;
>> + }
>> + break;
>> + case V4L2_CID_FLASH_STROBE_SOURCE:
>> + external_strobe = (c->val == V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
>> +
>> + return call_flash_op(v4l2_flash, external_strobe_set,
>> + v4l2_flash, external_strobe);
>> + case V4L2_CID_FLASH_STROBE:
>> + if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH ||
>> + ctrls[STROBE_SOURCE]->val !=
>> + V4L2_FLASH_STROBE_SOURCE_SOFTWARE)
>> + return -EINVAL;
>> + return led_set_flash_strobe(fled_cdev, true);
>> + case V4L2_CID_FLASH_STROBE_STOP:
>> + if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH ||
>> + ctrls[STROBE_SOURCE]->val !=
>> + V4L2_FLASH_STROBE_SOURCE_SOFTWARE)
>> + return -EINVAL;
>> + return led_set_flash_strobe(fled_cdev, false);
>> + case V4L2_CID_FLASH_TIMEOUT:
>> + /* no conversion is needed */
>> + return led_set_flash_timeout(fled_cdev, c->val);
>> + case V4L2_CID_FLASH_INTENSITY:
>> + /* no conversion is needed */
>> + return led_set_flash_brightness(fled_cdev, c->val);
>> + case V4L2_CID_FLASH_INDICATOR_INTENSITY:
>> + brightness = v4l2_flash_intensity_to_led_brightness(
>> + ctrls, INDICATOR_INTENSITY,
>> + c->val);
>> + led_set_brightness(led_cdev, brightness);
>> + return 0;
>> + case V4L2_CID_FLASH_TORCH_INTENSITY:
>> + /*
>> + * If not in MODE_TORCH don't call led-class brightness_set
>> + * op, as it would result in turning the torch led on.
>> + * Instead the value is cached only and will be written
>> + * to the device upon transition to MODE_TORCH.
>> + */
>> + if (ctrls[LED_MODE]->val == V4L2_FLASH_LED_MODE_TORCH) {
>> + brightness =
>> + v4l2_flash_intensity_to_led_brightness(
>> + ctrls, TORCH_INTENSITY,
>> + c->val);
>> + led_set_brightness(led_cdev, brightness);
>> + }
>> + return 0;
>> + case V4L2_CID_FLASH_SYNC_STROBE:
>> + fled_cdev->sync_led_id = c->val;
>> + return 0;
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +static const struct v4l2_ctrl_ops v4l2_flash_ctrl_ops = {
>> + .g_volatile_ctrl = v4l2_flash_g_volatile_ctrl,
>> + .s_ctrl = v4l2_flash_s_ctrl,
>> +};
>> +
>> +static void fill_ctrl_init_data(struct v4l2_flash *v4l2_flash,
>> + struct v4l2_flash_ctrl_config *flash_ctrl_cfg,
>> + struct v4l2_flash_ctrl_data *ctrl_init_data)
>> +{
>> + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
>> + const struct led_flash_ops *fled_cdev_ops = fled_cdev->ops;
>> + struct led_classdev *led_cdev = &fled_cdev->led_cdev;
>> + struct v4l2_ctrl_config *ctrl_cfg;
>> + u32 mask;
>> + s64 max;
>> +
>> + /* Init FLASH_FAULT ctrl data */
>> + if (flash_ctrl_cfg->flash_faults) {
>> + ctrl_init_data[FLASH_FAULT].supported = true;
>> + ctrl_cfg = &ctrl_init_data[FLASH_FAULT].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_FAULT;
>> + ctrl_cfg->max = flash_ctrl_cfg->flash_faults;
>> + ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
>> + V4L2_CTRL_FLAG_READ_ONLY;
>> + }
>> +
>> + /* Init INDICATOR_INTENSITY ctrl data */
>> + if (flash_ctrl_cfg->indicator_led) {
>> + ctrl_init_data[INDICATOR_INTENSITY].supported = true;
>> + ctrl_init_data[INDICATOR_INTENSITY].config =
>> + flash_ctrl_cfg->intensity;
>> + ctrl_cfg = &ctrl_init_data[INDICATOR_INTENSITY].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_INDICATOR_INTENSITY;
>> + ctrl_cfg->min = 0;
>> + ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
>> +
>> + /* Indicator LED can have only faults and intensity controls. */
>> + return;
>> + }
>> +
>> + /* Init FLASH_LED_MODE ctrl data */
>> + mask = 1 << V4L2_FLASH_LED_MODE_NONE |
>> + 1 << V4L2_FLASH_LED_MODE_TORCH;
>> + if (led_cdev->flags & LED_DEV_CAP_FLASH)
>> + mask |= 1 << V4L2_FLASH_LED_MODE_FLASH;
>> +
>> + ctrl_init_data[LED_MODE].supported = true;
>> + ctrl_cfg = &ctrl_init_data[LED_MODE].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_LED_MODE;
>> + ctrl_cfg->max = V4L2_FLASH_LED_MODE_TORCH;
>> + ctrl_cfg->menu_skip_mask = ~mask;
>> + ctrl_cfg->def = V4L2_FLASH_LED_MODE_NONE;
>> + ctrl_cfg->flags = 0;
>> +
>> + /* Init TORCH_INTENSITY ctrl data */
>> + ctrl_init_data[TORCH_INTENSITY].supported = true;
>> + ctrl_init_data[TORCH_INTENSITY].config = flash_ctrl_cfg->intensity;
>> + ctrl_cfg = &ctrl_init_data[TORCH_INTENSITY].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_TORCH_INTENSITY;
>> + ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
>> +
>> + if (!(led_cdev->flags & LED_DEV_CAP_FLASH))
>> + return;
>> +
>> + /* Init FLASH_STROBE_SOURCE ctrl data */
>> + mask = 1 << V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
>> + if (flash_ctrl_cfg->has_external_strobe) {
>> + mask |= 1 << V4L2_FLASH_STROBE_SOURCE_EXTERNAL;
>> + max = V4L2_FLASH_STROBE_SOURCE_EXTERNAL;
>> + } else {
>> + max = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
>> + }
>> +
>> + ctrl_init_data[STROBE_SOURCE].supported = true;
>> + ctrl_cfg = &ctrl_init_data[STROBE_SOURCE].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_STROBE_SOURCE;
>> + ctrl_cfg->max = max;
>> + ctrl_cfg->menu_skip_mask = ~mask;
>> + ctrl_cfg->def = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
>> +
>> + /* Init FLASH_STROBE ctrl data */
>> + ctrl_init_data[FLASH_STROBE].supported = true;
>> + ctrl_cfg = &ctrl_init_data[FLASH_STROBE].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_STROBE;
>> +
>> + /* Init STROBE_STOP ctrl data */
>> + ctrl_init_data[STROBE_STOP].supported = true;
>> + ctrl_cfg = &ctrl_init_data[STROBE_STOP].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STOP;
>> +
>> + /* Init STROBE_STATUS ctrl data */
>> + if (fled_cdev_ops->strobe_get) {
>> + ctrl_init_data[STROBE_STATUS].supported = true;
>> + ctrl_cfg = &ctrl_init_data[STROBE_STATUS].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STATUS;
>> + ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
>> + V4L2_CTRL_FLAG_READ_ONLY;
>> + }
>> +
>> + /* Init FLASH_TIMEOUT ctrl data */
>> + if (fled_cdev_ops->timeout_set) {
>> + ctrl_init_data[FLASH_TIMEOUT].supported = true;
>> + ctrl_init_data[FLASH_TIMEOUT].config =
>> + flash_ctrl_cfg->flash_timeout;
>> + ctrl_cfg = &ctrl_init_data[FLASH_TIMEOUT].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_TIMEOUT;
>> + ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
>> + }
>> +
>> + /* Init FLASH_INTENSITY ctrl data */
>> + if (fled_cdev_ops->flash_brightness_set) {
>> + ctrl_init_data[FLASH_INTENSITY].supported = true;
>> + ctrl_init_data[FLASH_INTENSITY].config =
>> + flash_ctrl_cfg->flash_intensity;
>> + ctrl_cfg = &ctrl_init_data[FLASH_INTENSITY].config;
>> + ctrl_cfg->id = V4L2_CID_FLASH_INTENSITY;
>> + ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
>> + }
>> +}
>> +
>> +static int v4l2_flash_init_sync_strobe_menu(struct v4l2_flash *v4l2_flash)
>> +{
>> + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
>> + struct v4l2_ctrl *ctrl;
>> + int i = 0;
>> +
>> + v4l2_flash->sync_strobe_menu =
>> + devm_kcalloc(fled_cdev->led_cdev.dev->parent,
>> + fled_cdev->num_sync_leds + 1,
>> + sizeof(*fled_cdev),
>> + GFP_KERNEL);
>> +
>> + if (!v4l2_flash->sync_strobe_menu)
>> + return -ENOMEM;
>> +
>> + v4l2_flash->sync_strobe_menu[0] = "none";
>> +
>> + for (i = 0; i < fled_cdev->num_sync_leds; ++i)
>> + v4l2_flash->sync_strobe_menu[i + 1] =
>> + (char *) fled_cdev->sync_leds[i]->led_cdev.name;
>
> What's here, and where does it come from?
>
> The rest of the sub-devices typically have a device's (chip's) name and the
> bus address (usually i2c).

It comes from the struct led_classdev's 'name' property, which is
assigned a pointer to the parsed 'label' DT property (LEDs common
bindings) string. It has to be unique as it is passed to the
device_create_with_groups in the led-class.c

We can't use device's name and I2C bus address, as a v4l2-flash sub-dev
is created per discrete LED element, not per device (many v4l2-flash
sub-devs can be created per one flash LED device).

>> + ctrl = v4l2_ctrl_new_std_menu_items(
>> + &v4l2_flash->hdl, &v4l2_flash_ctrl_ops,
>> + V4L2_CID_FLASH_SYNC_STROBE,
>> + fled_cdev->num_sync_leds,
>> + 0, 0,
>> + (const char * const *) v4l2_flash->sync_strobe_menu);
>
> Do you need the casting here?

Yes, there is warning generated without it:

drivers/media/v4l2-core/v4l2-flash.c:364:3: warning: passing argument 7
of ‘v4l2_ctrl_new_std_menu_items’ from incompatible pointer type
[enabled by default]
include/media/v4l2-ctrls.h:408:19: note: expected ‘const char * const*’
but argument is of type ‘char **’

>> +
>> + if (ctrl)
>> + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
>> +
>> + return 0;
>> +}
>> +
>> +static int v4l2_flash_init_controls(struct v4l2_flash *v4l2_flash,
>> + struct v4l2_flash_ctrl_config *flash_ctrl_cfg)
>> +
>> +{
>> + struct led_classdev *led_cdev = &v4l2_flash->fled_cdev->led_cdev;
>> + struct v4l2_flash_ctrl_data *ctrl_init_data;
>> + struct v4l2_ctrl *ctrl;
>> + struct v4l2_ctrl_config *ctrl_cfg;
>> + int i, ret, num_ctrls = 0;
>> +
>> + /* allocate memory dynamically so as not to exceed stack frame size */
>> + ctrl_init_data = kcalloc(NUM_FLASH_CTRLS, sizeof(*ctrl_init_data),
>> + GFP_KERNEL);
>> + if (!ctrl_init_data)
>> + return -ENOMEM;
>> +
>> + memset(ctrl_init_data, 0, sizeof(*ctrl_init_data));
>
> kcalloc() clears the memory, no need to do it again.

Right.

>> + fill_ctrl_init_data(v4l2_flash, flash_ctrl_cfg, ctrl_init_data);
>> +
>> + for (i = 0; i < NUM_FLASH_CTRLS; ++i)
>> + if (ctrl_init_data[i].supported)
>> + ++num_ctrls;
>> +
>> + v4l2_ctrl_handler_init(&v4l2_flash->hdl, num_ctrls);
>> +
>> + for (i = 0; i < NUM_FLASH_CTRLS; ++i) {
>> + ctrl_cfg = &ctrl_init_data[i].config;
>> + if (!ctrl_init_data[i].supported)
>> + continue;
>> +
>> + if (ctrl_cfg->id == V4L2_CID_FLASH_LED_MODE ||
>> + ctrl_cfg->id == V4L2_CID_FLASH_STROBE_SOURCE)
>> + ctrl = v4l2_ctrl_new_std_menu(&v4l2_flash->hdl,
>> + &v4l2_flash_ctrl_ops,
>> + ctrl_cfg->id,
>> + ctrl_cfg->max,
>> + ctrl_cfg->menu_skip_mask,
>> + ctrl_cfg->def);
>> + else
>> + ctrl = v4l2_ctrl_new_std(&v4l2_flash->hdl,
>> + &v4l2_flash_ctrl_ops,
>> + ctrl_cfg->id,
>> + ctrl_cfg->min,
>> + ctrl_cfg->max,
>> + ctrl_cfg->step,
>> + ctrl_cfg->def);
>> +
>> + if (ctrl)
>> + ctrl->flags |= ctrl_cfg->flags;
>> +
>> + if (i <= STROBE_SOURCE)
>> + v4l2_flash->ctrls[i] = ctrl;
>> + }
>> +
>> + kfree(ctrl_init_data);
>> +
>> + if (led_cdev->flags & LED_DEV_CAP_SYNC_STROBE) {
>> + ret = v4l2_flash_init_sync_strobe_menu(v4l2_flash);
>> + if (ret < 0)
>> + goto error_free_handler;
>> + }
>> +
>> + if (v4l2_flash->hdl.error) {
>> + ret = v4l2_flash->hdl.error;
>> + goto error_free_handler;
>> + }
>> +
>> + v4l2_ctrl_handler_setup(&v4l2_flash->hdl);
>> +
>> + v4l2_flash->sd.ctrl_handler = &v4l2_flash->hdl;
>> +
>> + return 0;
>> +
>> +error_free_handler:
>> + v4l2_ctrl_handler_free(&v4l2_flash->hdl);
>> + return ret;
>> +}
>> +
>> +/*
>> + * V4L2 subdev internal operations
>> + */
>> +
>> +static int v4l2_flash_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>> +{
>> + struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
>> + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
>> + struct led_classdev *led_cdev = &fled_cdev->led_cdev;
>> + int ret = 0;
>> +
>> + mutex_lock(&led_cdev->led_access);
>> +
>> + if (!v4l2_fh_is_singular(&fh->vfh)) {
>> + ret = -EBUSY;
>> + goto unlock;
>> + }
>> +
>> + led_sysfs_disable(led_cdev);
>> +
>> +unlock:
>> + mutex_unlock(&led_cdev->led_access);
>> + return ret;
>> +}
>> +
>> +static int v4l2_flash_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
>> +{
>> + struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
>> + struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
>> + struct led_classdev *led_cdev = &fled_cdev->led_cdev;
>> + int ret = 0;
>> +
>> + mutex_lock(&led_cdev->led_access);
>> +
>> + if (has_flash_op(v4l2_flash, external_strobe_set))
>> + ret = call_flash_op(v4l2_flash, external_strobe_set,
>> + v4l2_flash, false);
>> + led_sysfs_enable(led_cdev);
>> +
>> + mutex_unlock(&led_cdev->led_access);
>> +
>> + return ret;
>> +}
>> +
>> +static const struct v4l2_subdev_internal_ops v4l2_flash_subdev_internal_ops = {
>> + .open = v4l2_flash_open,
>> + .close = v4l2_flash_close,
>> +};
>> +
>> +static const struct v4l2_subdev_core_ops v4l2_flash_core_ops = {
>> + .queryctrl = v4l2_subdev_queryctrl,
>> + .querymenu = v4l2_subdev_querymenu,
>> +};
>> +
>> +static const struct v4l2_subdev_ops v4l2_flash_subdev_ops = {
>> + .core = &v4l2_flash_core_ops,
>> +};
>> +
>> +struct v4l2_flash *v4l2_flash_init(struct led_classdev_flash *fled_cdev,
>> + const struct v4l2_flash_ops *ops,
>> + struct v4l2_flash_ctrl_config *config)
>> +{
>> + struct v4l2_flash *v4l2_flash;
>> + struct led_classdev *led_cdev = &fled_cdev->led_cdev;
>> + struct v4l2_subdev *sd;
>> + int ret;
>> +
>> + if (!fled_cdev || !ops || !config)
>> + return ERR_PTR(-EINVAL);
>> +
>> + v4l2_flash = kzalloc(sizeof(*v4l2_flash), GFP_KERNEL);
>> + if (!v4l2_flash)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + sd = &v4l2_flash->sd;
>> + v4l2_flash->fled_cdev = fled_cdev;
>> + v4l2_flash->ops = ops;
>> + sd->dev = led_cdev->dev;
>> + v4l2_subdev_init(sd, &v4l2_flash_subdev_ops);
>> + sd->internal_ops = &v4l2_flash_subdev_internal_ops;
>> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>> + snprintf(sd->name, sizeof(sd->name), led_cdev->name);
>
> strlcpy() or snprintf(sd->name, sizeof(), "%s", led_cdev->name).

I think that strlcpy will fit here best.

>> +
>> + ret = v4l2_flash_init_controls(v4l2_flash, config);
>> + if (ret < 0)
>> + goto err_init_controls;
>> +
>> + ret = media_entity_init(&sd->entity, 0, NULL, 0);
>> + if (ret < 0)
>> + goto err_init_entity;
>> +
>> + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
>> +
>> + ret = v4l2_async_register_subdev(sd);
>> + if (ret < 0)
>> + goto err_init_entity;
>> +
>> + return v4l2_flash;
>> +
>> +err_init_entity:
>> + media_entity_cleanup(&sd->entity);
>
> media_entity_cleanup() can be called on an uninitialised entity (as long as
> it's zeroed). So you could simplity this a little. Up to you.
>
>> +err_init_controls:
>> + v4l2_ctrl_handler_free(sd->ctrl_handler);
>> + kfree(v4l2_flash);
>> +
>> + return ERR_PTR(ret);
>> +}
>> +EXPORT_SYMBOL_GPL(v4l2_flash_init);
>> +
>> +void v4l2_flash_release(struct v4l2_flash *v4l2_flash)
>> +{
>> + struct v4l2_subdev *sd = &v4l2_flash->sd;
>> +
>> + if (!v4l2_flash)
>> + return;
>> +
>> + v4l2_async_unregister_subdev(sd);
>> + media_entity_cleanup(&sd->entity);
>> + v4l2_ctrl_handler_free(sd->ctrl_handler);
>> + kfree(v4l2_flash);
>> +}
>> +EXPORT_SYMBOL_GPL(v4l2_flash_release);
>> +
>> +MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
>> +MODULE_DESCRIPTION("V4L2 Flash sub-device helpers");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/media/v4l2-flash.h b/include/media/v4l2-flash.h
>> new file mode 100644
>> index 0000000..404b5a8
>> --- /dev/null
>> +++ b/include/media/v4l2-flash.h
>> @@ -0,0 +1,139 @@
>> +/*
>> + * V4L2 Flash LED sub-device registration helpers.
>> + *
>> + * Copyright (C) 2015 Samsung Electronics Co., Ltd
>> + * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation."
>
> There's an unbalanced quote here. Is that intended? Same in the .c file.

This is unintended, to be removed.

>> + */
>> +
>> +#ifndef _V4L2_FLASH_H
>> +#define _V4L2_FLASH_H
>> +
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/v4l2-dev.h>
>> +#include <media/v4l2-event.h>
>> +#include <media/v4l2-ioctl.h>
>
> Do you need all the above headers here?

Actually no - only media/v4l2-ctrls.h nad media/v4l2-subdev.h are
required. I will fix this.

>> +
>> +struct led_classdev_flash;
>> +struct led_classdev;
>> +struct v4l2_flash;
>> +enum led_brightness;
>> +
>> +enum ctrl_init_data_id {
>> + LED_MODE,
>> + TORCH_INTENSITY,
>> + INDICATOR_INTENSITY,
>> + STROBE_SOURCE,
>> + FLASH_STROBE,
>> + STROBE_STOP,
>> + STROBE_STATUS,
>
> I think it'd be good to say e.g. in a comment here which values are still
> applicable to the struct v4l2_flash field ctrls.

OK.

>> + FLASH_TIMEOUT,
>> + FLASH_INTENSITY,
>> + FLASH_FAULT,
>> + SYNC_STROBE,
>> + NUM_FLASH_CTRLS,
>> +};
>> +
>> +/*
>> + * struct v4l2_flash_ctrl_data - flash control initialization data -
>> + * filled basing on the features declared
>> + * by the LED Flash class driver
>> + * @config: initialization data for a control
>> + * @supported: indicates whether a control is supported
>> + * by the LED Flash class driver
>> + */
>> +struct v4l2_flash_ctrl_data {
>> + struct v4l2_ctrl_config config;
>> + bool supported;
>
> Every control has an id, right? Could you use that one instead of
> "supported"?

OK.

>> +};
>> +
>> +struct v4l2_flash_ops {
>> + /* setup strobing the flash by hardware pin state assertion */
>> + int (*external_strobe_set)(struct v4l2_flash *v4l2_flash,
>> + bool enable);
>> +};
>> +
>> +/**
>> + * struct v4l2_flash_ctrl_config - V4L2 Flash controls initialization data
>> + * @intensity: constraints for the led in a non-flash mode
>> + * @flash_intensity: V4L2_CID_FLASH_INTENSITY settings constraints
>> + * @flash_timeout: V4L2_CID_FLASH_TIMEOUT constraints
>> + * @flash_faults: possible flash faults
>> + * @has_external_strobe: external strobe capability
>> + * @indicator_led: signifies that a led is of indicator type
>> + */
>> +struct v4l2_flash_ctrl_config {
>> + struct v4l2_ctrl_config intensity;
>> + struct v4l2_ctrl_config flash_intensity;
>> + struct v4l2_ctrl_config flash_timeout;
>> + u32 flash_faults;
>> + bool has_external_strobe:1;
>> + bool indicator_led:1;
>> +};
>> +
>> +/**
>> + * struct v4l2_flash - Flash sub-device context
>> + * @fled_cdev: LED Flash Class device controlled by this sub-device
>> + * @ops: V4L2 specific flash ops
>> + * @sd: V4L2 sub-device
>> + * @hdl: flash controls handler
>> + * @ctrls: array of pointers to controls, whose values define
>> + * the sub-device state
>> + * @sync_strobe_menu leds available for flash strobe synchronization
>> + */
>> +struct v4l2_flash {
>> + struct led_classdev_flash *fled_cdev;
>> + const struct v4l2_flash_ops *ops;
>> +
>> + struct v4l2_subdev sd;
>> + struct v4l2_ctrl_handler hdl;
>> + struct v4l2_ctrl *ctrls[STROBE_SOURCE + 1];
>> + char **sync_strobe_menu;
>> +};
>> +
>> +static inline struct v4l2_flash *v4l2_subdev_to_v4l2_flash(
>> + struct v4l2_subdev *sd)
>> +{
>> + return container_of(sd, struct v4l2_flash, sd);
>> +}
>> +
>> +static inline struct v4l2_flash *v4l2_ctrl_to_v4l2_flash(struct v4l2_ctrl *c)
>> +{
>> + return container_of(c->handler, struct v4l2_flash, hdl);
>> +}
>> +
>> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
>> +/**
>> + * v4l2_flash_init - initialize V4L2 flash led sub-device
>> + * @fled_cdev: the LED Flash Class device to wrap
>> + * @flash_ops: V4L2 Flash device ops
>> + * @config: initialization data for V4L2 Flash controls
>> + *
>> + * Create V4L2 subdev wrapping given LED subsystem device.
>> + *
>> + * Returns: A valid pointer, or, when an error occurs, the return
>> + * value is encoded using ERR_PTR(). Use IS_ERR() to check and
>> + * PTR_ERR() to obtain the numeric return value.
>> + */
>> +struct v4l2_flash *v4l2_flash_init(struct led_classdev_flash *fled_cdev,
>> + const struct v4l2_flash_ops *ops,
>> + struct v4l2_flash_ctrl_config *config);
>> +
>> +/**
>> + * v4l2_flash_release - release V4L2 Flash sub-device
>> + * @flash: the V4L2 Flash device to release
>> + *
>> + * Release V4L2 flash led subdev.
>> + */
>> +void v4l2_flash_release(struct v4l2_flash *v4l2_flash);
>> +
>> +#else
>> +#define v4l2_flash_init(fled_cdev, ops, config) (NULL)
>> +#define v4l2_flash_release(v4l2_flash)
>> +#endif /* CONFIG_V4L2_FLASH_LED_CLASS */
>> +
>> +#endif /* _V4L2_FLASH_H */
>


--
Best Regards,
Jacek Anaszewski


\
 
 \ /
  Last update: 2015-02-09 12:41    [W:0.175 / U:5.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site