lkml.org 
[lkml]   [2015]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.18 32/39] ASoC: sgtl5000: add delay before first I2C access
Date
3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Nelson <eric.nelson@boundarydevices.com>

commit 58cc9c9a175885bbf6bae3acf18233d0a8229a84 upstream.

To quote from section 1.3.1 of the data sheet:
The SGTL5000 has an internal reset that is deasserted
8 SYS_MCLK cycles after all power rails have been brought
up. After this time, communication can start

...
1.0us represents 8 SYS_MCLK cycles at the minimum 8.0 MHz SYS_MCLK.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
sound/soc/codecs/sgtl5000.c | 3 +++
1 file changed, 3 insertions(+)

--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1452,6 +1452,9 @@ static int sgtl5000_i2c_probe(struct i2c
if (ret)
return ret;

+ /* Need 8 clocks before I2C accesses */
+ udelay(1);
+
/* read chip information */
ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, &reg);
if (ret)



\
 
 \ /
  Last update: 2015-02-09 10:01    [W:0.187 / U:3.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site