lkml.org 
[lkml]   [2015]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i2c: imx: match return type of wait_for_completion_timeout
Date
return type of wait_for_completion_timeout is unsigned long not int. 
An appropriate variable of type unsigned long is introduced and the
assignments fixed up.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
---

Patch was only compile tested with imx_v6_v7_defconfig
(implies CONFIG_I2C_IMX=y)

Patch is against 3.19.0-rc7 (localversion-next is -next-20150204)

drivers/i2c/busses/i2c-imx.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index d7b26fc..2840ff4 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -601,6 +601,7 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
struct i2c_msg *msgs)
{
int result;
+ unsigned long timeout;
unsigned int temp = 0;
unsigned long orig_jiffies = jiffies;
struct imx_i2c_dma *dma = i2c_imx->dma;
@@ -624,10 +625,10 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
*/
imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
reinit_completion(&i2c_imx->dma->cmd_complete);
- result = wait_for_completion_timeout(
+ timeout = wait_for_completion_timeout(
&i2c_imx->dma->cmd_complete,
msecs_to_jiffies(DMA_TIMEOUT));
- if (result == 0) {
+ if (timeout == 0) {
dmaengine_terminate_all(dma->chan_using);
return -ETIMEDOUT;
}
@@ -663,6 +664,7 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
struct i2c_msg *msgs, bool is_lastmsg)
{
int result;
+ unsigned long timeout;
unsigned int temp;
unsigned long orig_jiffies = jiffies;
struct imx_i2c_dma *dma = i2c_imx->dma;
@@ -682,10 +684,10 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
return result;

reinit_completion(&i2c_imx->dma->cmd_complete);
- result = wait_for_completion_timeout(
+ timeout = wait_for_completion_timeout(
&i2c_imx->dma->cmd_complete,
msecs_to_jiffies(DMA_TIMEOUT));
- if (result == 0) {
+ if (timeout == 0) {
dmaengine_terminate_all(dma->chan_using);
return -ETIMEDOUT;
}
--
1.7.10.4


\
 
 \ /
  Last update: 2015-02-08 13:01    [W:0.058 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site