lkml.org 
[lkml]   [2015]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i2c: ismt: fix type of return var of wait_for_completion_timeout
Date
return type of wait_for_completion_timeout is unsigned long not int. As 
ret is in used for other calls a new appropriately typed variable timeout
is added to handle wait_for_completion_timeout

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
---

Patch was only compile tested with x86_64_defconfig + CONFIG_I2C_ISMT=m

Patch is against 3.19.0-rc7 (localversion-next is -next-20150204)

drivers/i2c/busses/i2c-ismt.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index f2b0ff0..2197ac8 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -380,6 +380,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
int size, union i2c_smbus_data *data)
{
int ret;
+ unsigned long timeout;
dma_addr_t dma_addr = 0; /* address of the data buffer */
u8 dma_size = 0;
enum dma_data_direction dma_direction = 0;
@@ -578,13 +579,13 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
ismt_submit_desc(priv);

/* Now we wait for interrupt completion, 1s */
- ret = wait_for_completion_timeout(&priv->cmp, HZ*1);
+ timeout = wait_for_completion_timeout(&priv->cmp, HZ*1);

/* unmap the data buffer */
if (dma_size != 0)
dma_unmap_single(&adap->dev, dma_addr, dma_size, dma_direction);

- if (unlikely(!ret)) {
+ if (unlikely(!timeout)) {
dev_err(dev, "completion wait timed out\n");
ret = -ETIMEDOUT;
goto out;
--
1.7.10.4


\
 
 \ /
  Last update: 2015-02-08 09:21    [W:0.070 / U:2.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site