lkml.org 
[lkml]   [2015]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/9] mtd: pxa3xx_nand: add a default chunk size
On Tue, 27 Jan 2015 15:10:11 +0100
Antoine Tenart <antoine.tenart@free-electrons.com> wrote:

> Add a default chunk size of 512 in the pxa3xx nand driver.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> ---
> drivers/mtd/nand/pxa3xx_nand.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 782ae24d6b7d..b2783b1f663c 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -1430,6 +1430,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
> if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
> goto KEEP_CONFIG;
>
> + /* Set a default chunk size */

Could you explain why you need to set this default chunk size ?
I guess it's because your NAND is not configured by the bootloader, and
thus you did not specify the keep-config attribute in the DT.
And I guess you need this field to be initialized before pxa_ecc_init is
called (for some NAND operations done in the meantime: READID ?).

Moreover, IMHO this should be place in an 'else' statement, otherwise
you'll overwrite the value set in pxa3xx_nand_detect_config.


> + info->chunk_size = 512;
> +
> ret = pxa3xx_nand_sensing(info);
> if (ret) {
> dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",



--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-02-08 21:21    [W:0.169 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site