lkml.org 
[lkml]   [2015]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: nand: gpmi: fixup return type of wait_for_completion_timeout
Date
return type of wait_for_completion_timeout is unsigned long not int. The
return variable is renamed to reflect its use and the type adjusted to
unsigned long.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
---

Patch was only compile tested with imx_v6_v7_defconfig
(implies CONFIG_MTD_NAND_GPMI_NAND=y)

Patch is against 3.19.0-rc7 (localversion-next is -next-20150204)

drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 33f3c3c..6e44d32 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -446,7 +446,7 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this,
struct dma_async_tx_descriptor *desc)
{
struct completion *dma_c = &this->dma_done;
- int err;
+ unsigned long timeout;

init_completion(dma_c);

@@ -456,8 +456,8 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this,
dma_async_issue_pending(get_dma_chan(this));

/* Wait for the interrupt from the DMA block. */
- err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
- if (!err) {
+ timeout = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
+ if (!timeout) {
dev_err(this->dev, "DMA timeout, last DMA :%d\n",
this->last_dma_type);
gpmi_dump_info(this);
@@ -477,7 +477,7 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this,
struct dma_async_tx_descriptor *desc)
{
struct completion *bch_c = &this->bch_done;
- int err;
+ unsigned long timeout;

/* Prepare to receive an interrupt from the BCH block. */
init_completion(bch_c);
@@ -486,8 +486,8 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this,
start_dma_without_bch_irq(this, desc);

/* Wait for the interrupt from the BCH block. */
- err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
- if (!err) {
+ timeout = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
+ if (!timeout) {
dev_err(this->dev, "BCH timeout, last DMA :%d\n",
this->last_dma_type);
gpmi_dump_info(this);
--
1.7.10.4


\
 
 \ /
  Last update: 2015-02-08 18:01    [W:0.076 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site