lkml.org 
[lkml]   [2015]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/8] fbdev: ssd1307fb: Add sysfs handles to expose contrast and dim setting to userspace.
On Fri, Feb 06, 2015 at 11:28:13PM +0100, niederp@physik.uni-kl.de wrote:
> From: Thomas Niederprüm <niederp@physik.uni-kl.de>
>
> This patch adds sysfs handles to enable userspace control over the display
> contrast as well as the dim mode. The handles are available as "contrast"
> and "dim" in the framebuffers sysfs domain.
>
> Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
> ---
> drivers/video/fbdev/ssd1307fb.c | 88 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 87 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
> index b38315d..02931c7 100644
> --- a/drivers/video/fbdev/ssd1307fb.c
> +++ b/drivers/video/fbdev/ssd1307fb.c
> @@ -33,6 +33,7 @@
> #define SSD1307FB_CONTRAST 0x81
> #define SSD1307FB_CHARGE_PUMP 0x8d
> #define SSD1307FB_SEG_REMAP_ON 0xa1
> +#define SSD1307FB_DISPLAY_DIM 0xac
> #define SSD1307FB_DISPLAY_OFF 0xae
> #define SSD1307FB_SET_MULTIPLEX_RATIO 0xa8
> #define SSD1307FB_DISPLAY_ON 0xaf
> @@ -43,6 +44,9 @@
> #define SSD1307FB_SET_COM_PINS_CONFIG 0xda
> #define SSD1307FB_SET_VCOMH 0xdb
>
> +#define MIN_CONTRAST 0
> +#define MAX_CONTRAST 255
> +
> #define BITSPERPIXEL 1
> #define DELAYDIVIDER 20
>
> @@ -69,6 +73,7 @@ struct ssd1307fb_par {
> u32 dclk_div;
> u32 dclk_frq;
> struct ssd1307fb_deviceinfo *device_info;
> + u32 dim;
> struct i2c_client *client;
> u32 height;
> struct fb_info *info;
> @@ -515,6 +520,79 @@ static const struct of_device_id ssd1307fb_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, ssd1307fb_of_match);
>
> +static ssize_t show_contrast(struct device *device,
> + struct device_attribute *attr, char *buf)
> +{
> + struct fb_info *info = dev_get_drvdata(device);
> + struct ssd1307fb_par *par = info->par;
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", par->contrast);
> +}
> +
> +static ssize_t store_contrast(struct device *device,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct fb_info *info = dev_get_drvdata(device);
> + struct ssd1307fb_par *par = info->par;
> + unsigned long contrastval;
> + int ret;
> +
> + ret = kstrtoul(buf, 0, &contrastval);
> + if (ret < 0)
> + return ret;
> +
> + par->contrast = max(min(contrastval,
> + (ulong)MAX_CONTRAST), (ulong)MIN_CONTRAST);
> +
> + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
> + ret = ret & ssd1307fb_write_cmd(par->client, par->contrast);
> + if (ret < 0)
> + return ret;
> +
> + return count;
> +}
> +
> +
> +static ssize_t show_dim(struct device *device,
> + struct device_attribute *attr, char *buf)
> +{
> + struct fb_info *info = dev_get_drvdata(device);
> + struct ssd1307fb_par *par = info->par;
> +
> + return snprintf(buf, PAGE_SIZE, "%d\n", par->dim);
> +}
> +
> +static ssize_t store_dim(struct device *device,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct fb_info *info = dev_get_drvdata(device);
> + struct ssd1307fb_par *par = info->par;
> + unsigned long dimval;
> + int ret;
> +
> + ret = kstrtoul(buf, 0, &dimval);
> + if (ret < 0)
> + return ret;
> +
> + par->dim = max(min(dimval, (ulong)1), (ulong)0);
> + if (par->dim)
> + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_DIM);
> + else
> + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
> + if (ret < 0)
> + return ret;
> +
> + return count;
> +}
> +
> +static struct device_attribute device_attrs[] = {
> + __ATTR(contrast, S_IRUGO|S_IWUSR, show_contrast, store_contrast),
> + __ATTR(dim, S_IRUGO|S_IWUSR, show_dim, store_dim),
> +
> +};
> +

I would have thought this was something accessible through the
framebuffer ioctl.

Apparently it's not, at least for the contrast, so maybe it should be
added there, instead of doing it for a single driver?

(oh, and btw, every sysfs file should be documented in
Documentation/ABI)

> static int ssd1307fb_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -523,7 +601,7 @@ static int ssd1307fb_probe(struct i2c_client *client,
> u32 vmem_size;
> struct ssd1307fb_par *par;
> u8 *vmem;
> - int ret;
> + int ret, i;
>
> if (!node) {
> dev_err(&client->dev, "No device tree data found!\n");
> @@ -650,6 +728,14 @@ static int ssd1307fb_probe(struct i2c_client *client,
> goto reset_oled_error;
>
> ret = register_framebuffer(info);
> +
> + for (i = 0; i < ARRAY_SIZE(device_attrs); i++)
> + ret = device_create_file(info->dev, &device_attrs[i]);
> +
> + if (ret) {
> + dev_err(&client->dev, "Couldn't register sysfs nodes\n");
> + }
> +

sysfs_create_groups does pretty much that already.

And don't forget to remove these files in the .remove()

> if (ret) {
> dev_err(&client->dev, "Couldn't register the framebuffer\n");
> goto panel_init_error;
> --
> 2.1.1
>

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-02-07 13:01    [W:0.394 / U:38.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site