lkml.org 
[lkml]   [2015]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] stmmac: Add AXI burst length support to platform device.
Date
The AXI Bus Mode Register controls the AXI master behavior. It is mainly
used to control the burst splitting and the number of outstanding requests.
This register is present and valid only in GMAC-AXI configuration. The old
driver only supports this feature on PCI devices. This patch adds an
'snps,apl' properties in DT to enable it on platform devices.

Signed-off-by: Chen Baozi <chenbaozi@kylinos.com.cn>
---
Documentation/devicetree/bindings/net/stmmac.txt | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
2 files changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index c41afd9..8f3c834 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -43,6 +43,7 @@ Optional properties:
available this clock is used for programming the Timestamp Addend Register.
If not passed then the system clock will be used and this is fine on some
platforms.
+- snps,abl: AXI Burst Length

Examples:

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3039de2..abbc897 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -230,6 +230,7 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
return -ENOMEM;
plat->dma_cfg = dma_cfg;
of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
+ of_property_read_u32(np, "snps,abl", &dma_cfg->burst_len);
dma_cfg->fixed_burst =
of_property_read_bool(np, "snps,fixed-burst");
dma_cfg->mixed_burst =
--
2.1.4


\
 
 \ /
  Last update: 2015-02-07 06:41    [W:0.066 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site