lkml.org 
[lkml]   [2015]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 7/7] Enabling VMX module for PPC64
From
Date
On Thu, 2015-02-05 at 15:21 -0200, Leonidas S. Barbosa wrote:
> This patch enables VMX module in PPC64.
>
> Signed-off-by: Leonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
> ---
> drivers/crypto/Kconfig | 12 ++++++++++++
> drivers/crypto/Makefile | 1 +
> drivers/crypto/vmx/Kconfig | 9 +++++++++
> drivers/crypto/vmx/Makefile | 21 +++++++++++++++++++++
> 4 files changed, 43 insertions(+)
> create mode 100644 drivers/crypto/vmx/Kconfig
> create mode 100644 drivers/crypto/vmx/Makefile
>
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 2fb0fdf..979cbff 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -436,4 +436,16 @@ config CRYPTO_DEV_QCE
> hardware. To compile this driver as a module, choose M here. The
> module will be called qcrypto.
>
> +config CRYPTO_DEV_VMX
> + bool "Support for VMX cryptographic acceleration instructions"
> + depends on PPC64
> + default n
> + help
> + Support for VMX cryptographic acceleration instructions.
> +
> +if CRYPTO_DEV_VMX
> + source "drivers/crypto/vmx/Kconfig"
> +endif
> +
> endif # CRYPTO_HW
> +

Unneeded extra line.

> diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
> index 3924f93..20a7127 100644
> --- a/drivers/crypto/Makefile
> +++ b/drivers/crypto/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
> obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
> obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/
> obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/
> +obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
> diff --git a/drivers/crypto/vmx/Kconfig b/drivers/crypto/vmx/Kconfig
> new file mode 100644
> index 0000000..6728864
> --- /dev/null
> +++ b/drivers/crypto/vmx/Kconfig
> @@ -0,0 +1,9 @@
> +config CRYPTO_DEV_VMX_ENCRYPT
> + tristate "Encryption acceleration support on P8 CPU"
> + depends on PPC64

The net effect of the "if CRYPTO_DEV_VMX" wrapper round the source-ing
of this file is that CRYPTO_DEV_VMX_ENCRYPT depends on CRYPTO_DEV_VMX.
That makes depending on PPC64 superfluous here. You might as well make
this symbol depend on CRYPTO_DEV_VMX and drop the "if CRYPTO_DEV_VMX"
wrapper.

> + default y
> + help
> + Support for VMX cryptographic acceleration instructions on Power8 CPU.
> + This module supports acceleration for AES and GHASH in hardware. If you
> + choose 'M' here, this module will be called vmx-crypto.
> +

Trailing line of whitespace only.

> diff --git a/drivers/crypto/vmx/Makefile b/drivers/crypto/vmx/Makefile
> new file mode 100644
> index 0000000..8898ce6
> --- /dev/null
> +++ b/drivers/crypto/vmx/Makefile
> @@ -0,0 +1,21 @@
> +obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o
> +vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o ghash.o
> +
> +ifeq ($(CONFIG_PPC64),y)

Can this test ever fail?

> +ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
> +TARGET := linux-ppc64le
> +else
> +TARGET := linux-pcc64
> +endif
> +endif
> +
> +quiet_cmd_perl = PERL $@
> + cmd_perl = $(PERL) $(<) $(TARGET) > $(@)
> +
> +$(src)/aesp8-ppc.S: $(src)/aesp8-ppc.pl
> + $(call cmd,perl)
> +
> +$(src)/ghashp8-ppc.S: $(src)/ghashp8-ppc.pl
> + $(call cmd,perl)
> +
> +.PRECIOUS: $(obj)/aesp8-ppc.S $(obj)/ghashp8-ppc.S


Paul Bolle



\
 
 \ /
  Last update: 2015-02-05 23:41    [W:0.277 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site